How can I derive Fick's second law for a fluid in a narrow pipe?

jason177
Messages
24
Reaction score
0

Homework Statement


Imagine a narrow pipe, filled with fluid, in which the concentration of a certain type of molecule varies only along the length of the pipe (in the x direction). By considering the flux of these particles from both directions into a short segment \Deltax, derive Fick's second law, dn/dt = D d2n/dx2 (those should be partial derivatives not normal ones) where n is the particle concentration and D is the diffusion coefficient.


Homework Equations


Jx = -D dn/dx
where J is the particle flux

The Attempt at a Solution


I don't even know where to start
 
Physics news on Phys.org
The question is: can you take Fick's first law for granted ?
 
It doesn't say whether we can or not so I assume we can.
 
Well, then this is not so hard. What you have to do is to consider a piece of medium with thickness \Delta X and "do the bookkeeping" of what goes in, what goes out, and hence how things change locally (also called "mass conservation") during a time \Delta t.
 
Alright well after playing around with it for a while I still have no idea what to do. How would I do it if we couldn't take Fick's first law for granted?
 
Consider a position x0, and a position a bit further, at x0 + \Delta x.

Consider a time t0 and a time t0 + \Delta t.

Consider a density n(x,t) that is function of x.

Now consider how much is "in" the box \Delta x at time t.

Consider how much "comes in" at the "x" wall and how much "goes out" at the "x + \Delta x side during the time \Delta t.

That should be more than enough to get you going...
 
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
The value of H equals ## 10^{3}## in natural units, According to : https://en.wikipedia.org/wiki/Natural_units, ## t \sim 10^{-21} sec = 10^{21} Hz ##, and since ## \text{GeV} \sim 10^{24} \text{Hz } ##, ## GeV \sim 10^{24} \times 10^{-21} = 10^3 ## in natural units. So is this conversion correct? Also in the above formula, can I convert H to that natural units , since it’s a constant, while keeping k in Hz ?
Back
Top