Determine the time the arrow is in flight

  • Thread starter Thread starter candycooke
  • Start date Start date
  • Tags Tags
    Flight Time
AI Thread Summary
To determine the time the arrow is in flight and the angles for a 30-meter distance, two equations involving the angle (θ) and time (t) must be established. The initial speed is 25 m/s, and the vertical motion equation should account for the highest point where the vertical velocity (v_fy) is zero. The correct equation for time in the y direction is t = 2(0 - 25sinθ)/-9.8 m/s², while the horizontal motion equation is t = 30 m/(25cosθ). The confusion arises from incorrectly solving for time and not considering the symmetrical nature of projectile motion. Understanding these equations will lead to finding both angles at which the arrow can be aimed.
candycooke
Messages
13
Reaction score
0
An arrow is shot with an initial speed of 25 m/s (and lands at the same height as its launch height). There are two possible angles at which it chould be aimed so that it goes 30 meters. What are they?

Givens:
v(i)=25m/s
a=-9.8m/s^2
d(x)=30m


I know the first step is to determine the time the arrow is in flight, but I'm not exactly sure which formula to use in order to find time.
 
Physics news on Phys.org
In this problem you have two unknown variables, the angle,\theta, and the time, t. You need to find two equations involving both of those variables, then you can solve for both of them.

HINT:

You have motion in two directions here. Can you set up an equation of motion for each direction involving \theta and t?
 
since the porabola is symetrical, than v(i)=v(f)
for y components:
t=v(f)-v(i)a
=0a

for x components:
t=d/v
=30m/25cos\theta

therefore:0=30m/25cos\theta
\theta=33.6

So I've figured out one angle but I am unsure how to determine the second possible angle.
 
Your equation for the x direction is correct. Leave it as is.

Your equation for the y direction of motion is wrong. Think about what it says. How can the arrow take 0 seconds to make it's trip?

You solved for t incorrectly. Check your work. Also, I suggest using the highest point as your final point in the y direction. (Why you ask? What is v_fy at the highest point?) Remember that the arrow will hit it's highest point at t/2 seconds, where t is the time of the whole trip.
 
Since v_fy=0 at the highest point:
t/2=(0-25sin\theta)/-9.8m/s^2
therefore:
t=2(0-25sin\theta)/-9.8m/s^2

but this is not equal to t=30m/(25cos\theta)

I am so confused.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top