Determining Acceleration of Object on x-Axis

  • Thread starter Thread starter patelneel1994
  • Start date Start date
  • Tags Tags
    Acceleration
AI Thread Summary
An object on the x-axis experiences constant acceleration, increasing its x-coordinate by 80 m in 5 seconds, with a final velocity of +20 m/s. The acceleration calculation appears to yield a negative value, which raises questions about the equations used. The discussion emphasizes the need to correctly apply kinematic equations, particularly distinguishing between uniform motion and accelerated motion. The initial velocity is unknown, complicating the use of certain equations, but the difference in position can be utilized. Clarifying these points is essential for accurately determining the object's acceleration.
patelneel1994
Messages
26
Reaction score
0

Homework Statement


An object moving on the x-axis with a constant acceleration increases its x coordinate by 80 m in a time of 5.0 s and has a velocity of +20 m/s at the end of this time. Determine the acceleration of the object during this motion.
x = 80m t = 5.0 second v = + 20m/s a = while in motion

Homework Equations


80 m = 100 m + 1/2 a 25 s2
-1.6 m/s2


The Attempt at a Solution


Supppos to be positive I don't know why I get negative acceleration?
 
Physics news on Phys.org
Can we apply this law?
Velocity is positive direction and if the velocity increases with time, then acceleration is said to be positive. In this case, if the velocity is reducing with time, then the acceleration said to be negative
 
Equation is not good. Where does the 100 come from?
This time, constant acceleration during 5 seconds gives an increase in velocity. There is an equation for that.
The other equation is the full expression for x(t). Two equations, initial velocity and acceleration unknown. Should be solvable.
 
is it Xt = X0 + V0 . t + 1/2 . a .t^2?
 
100 m came from 20 m/s . 5 s
 
#4 is correct.

In #5 you get meters allright, but that expression is for uniform (constant speed) motion. In this case the thing accelerates, so the average speed in these 5 sec was less.In #4 you don't know X(5) or X(0), but you know their difference, which is all you need.
You also don't know V(0) so you can't plug in a numerical value.

You still need an equation for V(t), where you plug in the knowledge that V(5 sec) = 20 m/s.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Thread 'Trying to understand the logic behind adding vectors with an angle between them'
My initial calculation was to subtract V1 from V2 to show that from the perspective of the second aircraft the first one is -300km/h. So i checked with ChatGPT and it said I cant just subtract them because I have an angle between them. So I dont understand the reasoning of it. Like why should a velocity be dependent on an angle? I was thinking about how it would look like if the planes where parallel to each other, and then how it look like if one is turning away and I dont see it. Since...
Back
Top