Optical DIY Exoplanet Detector with a DSLR

AI Thread Summary
The discussion highlights the challenges of building a DIY exoplanet detector using a DSLR camera, emphasizing that achieving reliable results is difficult without a telescope due to limited light collection. The author shares personal experience with a CCD camera and telescope setup, noting that even with that equipment, data quality was suboptimal. The article linked provides additional insights, including methods for compensating for atmospheric fluctuations, which were not covered in the video. Overall, the project is recognized as intriguing but technically demanding.
Messages
19,788
Reaction score
10,741
Great project to do!

DIY Exoplanet Detector with a DSLR
 
  • Like
Likes Amine Quentin
Physics news on Phys.org
Wow, he's right on the edge of the noise floor. I've done this exact project with a CCD camera and an 8 inch telescope and I can tell you that just using a camera lens without a telescope it's going to be very difficult to see any exoplanet transits. Even with my setup the quality of my data points was lower than I'd have liked. With just a camera you're simply not gathering enough light. (Not to mention how much gets rejected by the bayer array on the camera's sensor)
 
  • Like
Likes Greg Bernhardt
  • Like
Likes Amine Quentin and Drakkith
great video:smile:
thank's :biggrin:
 
Some time ago I posted this Raspberry PI DIY Mass Spec using Raman Scattering. It's was something of a cumbersome project though, needing a 3D printer and special heat-resistant plastic giving of carcinogenic fumes during printing. To be blunt it was also not very mobile and interpreting the results was further cumbersome Recently though, I've been told that Arduino, and it's various sensor packages, has matured to the point where it's a usable alternative. Now I realize that a cigarette...

Similar threads

Replies
1
Views
2K
Replies
1
Views
5K
Replies
8
Views
7K
Replies
1
Views
572
Replies
7
Views
4K
Back
Top