Effects of Distance and Voltage on Energy Stored in Capacitors

AI Thread Summary
Increasing the distance between two parallel plates while connected to a battery decreases the capacitance, leading to a reduction in energy stored in the capacitor. When the distance is doubled and the battery voltage is also doubled, the energy stored increases by a factor of two. The energy in a capacitor is expressed as U = (1/2)CV² or U = (1/2)Q²/C, linking energy directly to capacitance and voltage. The capacitance formula incorporates the area of the plates, the dielectric constant, and the separation distance. Understanding these relationships is crucial for analyzing energy changes in capacitors.
displayname
Messages
6
Reaction score
0

Homework Statement



The distance between two parallel plates is increased while
they remain hooked to a battery. The energy stored in the
capacitor will:

AND

The distance between two parallel plates is doubled while
they remain hooked to a battery. The battery voltage also is
doubled. The energy stored in the capacitor will:

Homework Equations



Q = VC
U2 = (Q2)/(2C) = 1/2C(V2)

The Attempt at a Solution



As the distance is increased, the capacitance will decrease. Since energy is directly related to capacitance, the energy will also decrease? I'm not sure if I'm right.
 
Physics news on Phys.org
displayname said:
As the distance is increased, the capacitance will decrease. Since energy is directly related to capacitance, the energy will also decrease? I'm not sure if I'm right.

You are right. Even more right, the energy in a capacitor is (1/2)CV2, or (1/2)Q2/C. Make with that what you will!
 
so for the second question, energy increases by a factor of 2. Right?
 
If that's what the equations say, then that's what it is!
 
Another equation you will need is for capacitance.

690d608cf871d5c6e822647d0a0cb583.png


where
C is the capacitance;
A is the area of overlap of the two plates;
εr is the relative static permittivity (sometimes called the dielectric constant) of the material between the plates (for a vacuum, εr = 1);
and d is the separation between the plates.

So substitute C with the physical equation into the energy equation

U2 = (Q2)/(2C) = 1/2C(V2)

U2 = 1/2·(εr·A/(4πd))·(V2)

You can draw your own conclusions from here.

Info from Wikipedia -> http://en.wikipedia.org/wiki/Capacitance"
 
Last edited by a moderator:
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top