Egg Drop Challenge: Minimize Mass and Avoid Padding

AI Thread Summary
To successfully drop an egg from school bleachers without using padding or cushioning, participants should focus on creating a lightweight contraption that minimizes impact. Suggestions include using straws and popsicle sticks to construct a frame that suspends the egg in the center, effectively lowering the impulse at impact. The design should aim to increase the time of the egg's descent to reduce the force experienced upon hitting the ground. Flexible straws may be particularly beneficial in achieving this goal. Overall, the key is to balance minimal mass with effective impact absorption.
Amergirls
Messages
1
Reaction score
0
I need to drop an egg off my school bleachers. I can't use any kind if padding, cushining, or packing material. The entire egg may be covered but does not have to be. The contraption also needs to be of the smallest possible mass. Please post any suggestions that you can. Thank you all.
 
Physics news on Phys.org
I believe my schools science olympiad team had to do this.

I'm not sure how they did it but they used an assortment of straws tape and popsicle sticks. The egg was suspended in the middle, surrounded by straws that were taped together and the outter frame was made of popsicle sticks.
 
Remember you don't want the egg to break. So you should lower the impulse the egg has with the ground. Impulse= Force x Time.

Try to lower the time the egg hits the ground. flexible straws could help.
 
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanged mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top