Electrical Safety: Explaining Automotive Battery Hazards

  • Thread starter Thread starter usmanmasood
  • Start date Start date
  • Tags Tags
    Electrical Safety
AI Thread Summary
Automotive batteries, despite their nominal 12 V d.c. voltage, pose significant safety hazards due to their ability to deliver high currents, often exceeding 200 amperes. A short circuit can generate enough current to vaporize metal objects, creating dangerous sparks. Additionally, these sparks can ignite hydrogen gas released during the battery's chemical reactions, leading to potential explosions. The discussion also highlights concerns about users seeking quick answers without doing their own research, indicating a misuse of forum resources. Understanding these hazards is crucial for safe handling and maintenance of automotive batteries.
usmanmasood
Messages
4
Reaction score
0
Sir Iam in great need of this answer

1.An automotive battery currently operates at a nominal 12 V d.c.This voltage level is normally considered inherently safe.Explain why the automotive battery still represents a safety hazard.(at least 100 words).
 
Engineering news on Phys.org
Please reply me as soon as possible
 
Though it's low-voltage, a car battery can provide an enormous amount of current, often more than 200 amperes. If you drop a screwdriver across the terminals, for example, enough current will flow to vaporize the screwdriver and splatter molten metal all over the unfortunate mechanic.

- Warren
 
A significant danger is that sparks resulting from a short will ignite free Hydrogen released by the chemical reaction inside the battery.

This really looks like a blatant effort to get us to do your homework. I do not think this is proper use of the forums. With a bit of effort on your part all of this information is available.
 
"at least 100 words" ? Sure looks like you're trying to get someone to do your homework for you !
 
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Back
Top