Electrostatic potential from the perspective of an electron

AI Thread Summary
Electrons do not "feel" electric potential directly; instead, they respond to the electric field, which is the gradient of the potential that exerts force on them. When a person connects to a power source while standing on an insulating material, electrons do not penetrate the skin, as no current flows until contact is made with a conductive path. A bird sitting on a power line acquires the same potential as the line, preventing current flow through its body. Touching a wire allows current to flow until the person reaches the same potential as the wire, which can be dangerous at high voltages. Understanding these principles is crucial for grasping electrostatic interactions in various environments.
cliowa
Messages
190
Reaction score
0
Thinking in terms of electric circuits and electrostatic potential I understand how an electric current arises as manifestation of a difference in potential. How does this work at a more microscopic level? I.e. how does an electron know what potential it's environment is at?

E.g.: If I, standing on the earth, connect myself to a power plug, the electron in the wire just inside the wall will run through me. If I stand on some insulating material however, the electron will not. How precise is this? I.e. will there be virtually not a single electron penetrating my skin?

If a bird sits on a power line he "takes over" the potential of the power line (thereby avoiding any current through his body), right? Does this have any implications on a physiological level?

Looking forward to your thoughts...Cliowa
 
Physics news on Phys.org
An electron doesn't "feel" the electric potential at a point, any more than you "feel" the gravitational potential at the location where you're standing. That is, you don't "feel" any different standing on the first floor of a building than on the second floor, even though the second floor is at a higher graviational potential.

What the electron actually "feels" is the electric field E that acts on it, which is the gradient of the electric potential. The electric field produces the force which makes the electron move, via F = qE.

Inside a uniform wire with a fixed potential difference between its ends, the electric potential decreases steadily as you move from one end to the other, i.e. the gradient of the potential is uniform, and so is the electric field.
 
I agree completely. What puzzles me is rather the way the electrostatic potential can be "acquired" through contact. Example: A bird that first sat on some tree (which has the same potential as the earth) and then flies off to a power line, where he (suddenly?) "acquires" the potential of the power line.

Again: Is is really true that not a single electron from the power plug will penetrate my skin if I stand on some completely insulating material?
 
No, by touching a wire, a current will flow into you until you are at the same potential as the wire. At this point, the charge that you have acquired is equal to your capacitance times the voltage. With a wire at thousands of volts, you will therefore feel a jolt. It can seen that it is hazardous to touch a high voltage AC wire, since the current will never stop.
 
This is from Griffiths' Electrodynamics, 3rd edition, page 352. I am trying to calculate the divergence of the Maxwell stress tensor. The tensor is given as ##T_{ij} =\epsilon_0 (E_iE_j-\frac 1 2 \delta_{ij} E^2)+\frac 1 {\mu_0}(B_iB_j-\frac 1 2 \delta_{ij} B^2)##. To make things easier, I just want to focus on the part with the electrical field, i.e. I want to find the divergence of ##E_{ij}=E_iE_j-\frac 1 2 \delta_{ij}E^2##. In matrix form, this tensor should look like this...
Thread 'Applying the Gauss (1835) formula for force between 2 parallel DC currents'
Please can anyone either:- (1) point me to a derivation of the perpendicular force (Fy) between two very long parallel wires carrying steady currents utilising the formula of Gauss for the force F along the line r between 2 charges? Or alternatively (2) point out where I have gone wrong in my method? I am having problems with calculating the direction and magnitude of the force as expected from modern (Biot-Savart-Maxwell-Lorentz) formula. Here is my method and results so far:- This...
Back
Top