Elementry Electrostatics question

  • Thread starter Thread starter 838
  • Start date Start date
  • Tags Tags
    Electrostatics
AI Thread Summary
To find the position for a third charge (q3=+20 nC) where the net electrostatic force is zero, the forces from the two existing charges (q1=+20 nC and q2=-40 nC) must be equal and opposite. The calculations involve setting the forces from q1 and q2 on q3 equal to each other, leading to the equation k*(q1q3)/a^2 = k*(q2q3)/(10-a)^2. The discussion highlights the importance of determining the correct range for the position of q3, suggesting that it should be placed at -24.14 cm or 4.14 cm, depending on the assumed position relative to the other charges. Ultimately, the correct position for equilibrium is confirmed to be at -24.14 cm. Understanding the direction of forces is crucial, as forces pointing in the same direction do not result in equilibrium.
838
Messages
12
Reaction score
0

Homework Statement


Two point charges (q1=+20 nC and q2=-40 nC) are placed 10.0 cm apart onlong the x-axis. Where can a third charge (q3=+20 nC) be placed so that the net electrostatic force on that charge is zero?


Homework Equations



F=k(q1q2)/r^2

The Attempt at a Solution



It's definitely not a hard problem, I'm guessing I'm supposed to set the entire equation into equilibrium. Other than that basic concept, I really don't understand how to solve for this problem. My professor only went over calculating forces between two charges.

Thanks for any help, I could really use it. :(
 
Physics news on Phys.org
Place q1 at x=0 and q2 at x=10, and put q3 at x=a. Now write the two forces on q3 as a function of a, set them equal and solve for a. It's helpful when you do this to figure out what portion of the line you expect q3 to be on first. Will a<0, 0<a<10 or a>10?
 
So if I'm understanding you correctly, it should look like this:

k*(q1q3)/a^2=k*(q2q3)/(10+a)^2 since a < 0. I think...

So we get a = 4.14

To test this, I can calculate the force between q1 and q3 and match it with q2 and q3, since they should be equal.

So, k*(q1q3)/(4.14^2) = 23.31k
and k*(q2q3)/(10-4.14)^2=23.31k.

Should be correct. Any errors?

Thanks.
 
Careful! I think you are picking the wrong root. You want solve k*(q1q3)/a^2=k*(q2q3)/(10-a)^2 if a<0 is the coordinate of the point. If you solve that you get 4.14 and -24.14. Since you assumed a<0 the one to pick is -24.14. If you call a the distance of the point from the origin then you solve k*(q1q3)/a^2=k*(q2q3)/(10+a)^2 and assuming a>0. You get -4.14, 24.14 and pick the positive one.
 
Ah, ok, I understand. I wasn't sure which root to choose for. Thanks a lot!
 
838 said:
Ah, ok, I understand. I wasn't sure which root to choose for. Thanks a lot!

The root you chose corresponds to the point between the charge at x=0 and the charge at x=10. Here the magnitude of the forces are equal, but they point in the same direction.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top