Exist Devices to Assist in Exerting 160+ Lbs of Force?

AI Thread Summary
Devices that can assist in exerting a force of 160 lbs or more include linear actuators, hydraulic ram systems, and screw jacks, which may enable arm movements with minimal effort. The discussion highlights the potential of these technologies for applications requiring significant force without direct physical support. Leverage is also mentioned as a viable method to lift heavy weights, provided the materials used are strong enough. Participants express a need for more detailed information and research on these options. Overall, the conversation centers around exploring mechanical solutions for enhancing arm strength and movement efficiency.
socalfusions
Messages
7
Reaction score
0
Do any devices exist that can assist your arms in exerting a force of 160 lbs or more in a direction of such where you would have your arms extended and move them up and down, like flapping wings for example, to the effect that you would be using the minimum amount of effort required which would be you just moving your arms and not actually have to support the required weight?

In another post I made about what devices could help in exerting a force of 160 lbs or greater someone mentioned linear actuators, which looked very promising, but I haven't come across solid enough information of whether they could obtain what I am looking for.

Perhaps my more detailed explanation in this thread will be more helpful in determining whether such technology exists, thanks in advance.
 
Engineering news on Phys.org


Linear actuators, some form of hydraulic ram system or a screw jack.

That's the best I can come up with.
 


A lever.
 


jarednjames said:
Linear actuators, some form of hydraulic ram system or a screw jack.

That's the best I can come up with.

Thanks I'll try to do some more research on these suggestions.

russ_watters said:
A lever.

Can you elaborate some more please? :-p
 


socalfusions said:
Can you elaborate some more please? :-p

A big lever?

But seriously, with enough leverage, providing the lever material is up to it, you can lift anything.
 
I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
Thread 'Calculate minimum RPM to self-balance a CMG on two legs'
Here is a photo of a rough drawing of my apparatus that I have built many times and works. I would like to have a formula to give me the RPM necessary for the gyroscope to balance itself on the two legs (screws). I asked Claude to give me a formula and it gave me the following: Let me calculate the required RPM foreffective stabilization. I'll use the principles of gyroscopicprecession and the moment of inertia. First, let's calculate the keyparameters: 1. Moment of inertia of...
Thread 'Turbocharging carbureted petrol 2 stroke engines'
Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
Back
Top