Can Chemical Energy Generation Compete with Nuclear Energy's Safety and Economy?

AI Thread Summary
The discussion centers on the potential for generating energy from chemical reactions as an alternative to nuclear energy, emphasizing the economic and safety aspects. A method involving the electrokinetic properties of water in microchannels is highlighted as a promising approach. The conversation touches on various chemical reactions, such as the combustion of hydrocarbons and the reaction of hydrogen and oxygen to produce water, noting that while these methods may be more economical than nuclear energy, they still face safety and developmental challenges. The efficiency of electrolysis is questioned, as it requires more energy than the energy produced through combustion or fuel cells. The feasibility of energy generation depends on specific circumstances, such as location and application, with solar energy being a more viable option in certain scenarios. The discussion concludes that current methods are still in early development stages and face significant hurdles, including economic viability and storage issues.
wunderkind
Messages
12
Reaction score
0
Is it possible to generate energy from chemicals in a way that would be economical, and safer compared to nuclear energy, such as the removal of electrons, etc?
 
Chemistry news on Phys.org
Well there's one way I read about that uses water in some weird way
http://www.sciencedaily.com/releases/2003/10/031020054036.htm

new method of generating electric power by harnessing the natural electrokinetic properties of a liquid, such as ordinary tap water, when it is pumped through tiny microchannels

What do you mean by "removal of electrons"? Do you mean something like a plasma or do you mean ionic compounds?
 
Well, there's always:

CnH(2n+2) + O2 --> CO2 + H2O

It's more economical then nuclear energy, but arguably less safe.

There's:

H2 + O2 --> H2O

But the safety and economics of it is still in the early development stage.
 
Chemicalsuperfreak said:
H2 + O2 --> H2O

But the safety and economics of it is still in the early development stage.

That won't work. The electrolysis takes more energy than the combustion (or fuel cell) gives off.
 
The answer depends on where, when, for what, how you are using the energy. For example, a solar collector would be cheaper in a deserted place than nuclear power 1,000 km far.
 
ShawnD said:
That won't work. The electrolysis takes more energy than the combustion (or fuel cell) gives off.


That's why it's not very economical. Obviously if they tried to make it from water it wouldn't work. Most nowdays comes from oil reserves. They're working on ways to make it biologically. There's also problems with storing it. So we're aways from making it work well.
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
I was introduced to the Octet Rule recently and make me wonder, why does 8 valence electrons or a full p orbital always make an element inert? What is so special with a full p orbital? Like take Calcium for an example, its outer orbital is filled but its only the s orbital thats filled so its still reactive not so much as the Alkaline metals but still pretty reactive. Can someone explain it to me? Thanks!!
I'm trying to find a cheap DIY method to etch holes of various shapes through 0.3mm Aluminium sheet using 5-10% Sodium Hydroxide. The idea is to apply a resist to the Aluminium then selectively ablate it off using a diode laser cutter and then dissolve away the Aluminium using Sodium Hydroxide. By cheap I mean resists costing say £20 in small quantities. The Internet has suggested various resists to try including... Enamel paint (only survived seconds in the NaOH!) Acrylic paint (only...
Back
Top