Find a Book for ProE Woldfire 2.0

  • Thread starter Thread starter Rocket_guy
  • Start date Start date
  • Tags Tags
    Request
AI Thread Summary
ProE Wildfire 2.0 users are seeking resources to learn the software, as suitable books for this version are scarce. The discussion centers on whether the book for ProE Wildfire 3.0 can be effectively used to study version 2.0, with the assumption that the software upgrades are not drastically different. Users mention the helpful menu mapper feature in Wildfire 3.0 that aids in transitioning from older versions. There is a request for insights on the extent of changes between the two versions and recommendations for knowledgeable contacts. The conversation highlights the challenges of finding learning materials for specific software versions.
Rocket_guy
Messages
37
Reaction score
0
~~one serious request!~~

One serious request ...
Can anyone tell me ...
I have got ProE woldfire 2.0

But I couldn't find a suitable book for the same version. All I can find is the book for proe wildfire3.0 .. but can't buy the software of Pro-e wildfire 3.0 .. ..so I will have to stick with the second version of the software .. i.e. pro-e wildfire 2.0. Now the question that arises is that "Can I study Pro-e 2.0 using the book for 3.0 ? Becoz I assume that the sofware must be upgraded and I don't think that it would have gone under a complete change! So if anyone who has an Idea how far this software has been changed in the third version mind telling me? Or anyone knows a guy who knows this and can ask him and tell me?

Thanx a lot everyone for ur support!
 
Last edited:
Engineering news on Phys.org
Last edited by a moderator:

Thread 'Race car suspension Class'

Posted June 2024 - 15 years after starting this class. I have learned a whole lot. To get to the short course on making your stock car, late model, hobby stock E-mod handle, look at the index below. Read all posts on Roll Center, Jacking effect and Why does car drive straight to the wall when I gas it? Also read You really have two race cars. This will cover 90% of problems you have. Simply put, the car pushes going in and is loose coming out. You do not have enuff downforce on the right...
View full post »
Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Thread 'Physics of Stretch: What pressure does a band apply on a cylinder?'

Scenario 1 (figure 1) A continuous loop of elastic material is stretched around two metal bars. The top bar is attached to a load cell that reads force. The lower bar can be moved downwards to stretch the elastic material. The lower bar is moved downwards until the two bars are 1190mm apart, stretching the elastic material. The bars are 5mm thick, so the total internal loop length is 1200mm (1190mm + 5mm + 5mm). At this level of stretch, the load cell reads 45N tensile force. Key numbers...
View full post »

Thread 'Cantilever help'

I'm trying to decide what size and type of galvanized steel I need for 2 cantilever extensions. The cantilever is 5 ft. The space between the two cantilever arms is a 17 ft Gap the center 7 ft of the 17 ft Gap we'll need to Bear approximately 17,000 lb spread evenly from the front of the cantilever to the back of the cantilever over 5 ft. I will put support beams across these cantilever arms to support the load evenly
View full post »

Similar threads

What Are the Key Differences Between Pro Engineer Wildfire 3.0 and 4.0?
Replies
1
Views
4K
Which CAD package should I choose for my small company?
Replies
10
Views
3K
Where can I find the cooling tower institute blue book soft copy
Replies
1
Views
5K
Other Advice on books for logic puzzle questions for software engineers
Replies
5
Views
2K
Modal mass and kinetic energy in FEM modal analysis
Replies
3
Views
3K
Fortran Spring Pendulum system in FORTRAN
Replies
8
Views
2K
Got rejected from all of my PhD programs now what?
Replies
27
Views
6K
Finding Displacement based on Velocity Graph
Replies
11
Views
2K
Suggestion Making an online digital library in PF
Replies
17
Views
2K
Comp Sci What is the difference between GET vs POST vs PUT? Mainly POST vs PUT?
Replies
4
Views
1K

Hot Threads

Recent Insights

Back
Top