Find the length of PR and the bearing of P from R

  • Thread starter Thread starter Richie Smash
  • Start date Start date
  • Tags Tags
    Bearing Length
AI Thread Summary
The discussion revolves around calculating the distance and bearing from Port R to Port P after a ship sails from Port P to Port Q and then to Port R. The participants worked through a diagram to identify angles, ultimately determining angle PRQ as 75° and using the cosine rule to find the length PR as 5.13 nautical miles. They also calculated the bearing of P from R as 127.6° by extending a line from R and analyzing corresponding angles. The problem-solving process highlighted the importance of accurately identifying angles and applying trigonometric rules. The participants successfully resolved the homework problem with collaborative input.
Richie Smash
Messages
293
Reaction score
15

Homework Statement


A ship sails 3 nautical miles from Port P on a course of 64° to Port Q, then changes course to 285° and sails a further 7 nautical miles to Port R.
(i) Draw a carefully labelled diagram of the entire route taken. Show the north direction where necessary.
(ii)Calculate the distance PR to three significant figures.
(iii) Determine the bearing of P from R.

Homework Equations

The Attempt at a Solution


I have drawn the diagram which i will post, as you can see I found angle PRQ to be 75° using alternate angles, and I found the exterior angles of the first two bearings by subtracting them from 360°.
But I can't seem to figure out the other two angles in the triangle to find the length, I could simply use the sine rule then°

PLEASE NOTE ON THE DIAGRAM THE ANGLE WHICH SAYS 375° SHOULD BE 285°
 

Attachments

  • bering.png
    bering.png
    10 KB · Views: 722
Last edited:
Physics news on Phys.org
Richie Smash said:

Homework Statement


A ship sails 3 nautical miles from Port P on a course of 64° to Port Q, then changes course to 285° and sails a further 7 nautical miles to Port R.
(i) Draw a carefully labelled diagram of the entire route taken. Show the north direction where necessary.
(ii)Calculate the distance PR to three significant figures.
(iii) Determine the bearing of P from R.

Homework Equations

The Attempt at a Solution


I have drawn the diagram which i will post, as you can see I found angle PRQ to be 75° using alternate angles, and I found the exterior angles of the first two bearings by subtracting them from 360°.
But I can't seem to figure out the other two angles in the triangle to find the length, I could simply use the sine rule then
Here is a full size image of your diagram:
bering-png.png

.
Can you determine angle PQR ?
 

Attachments

  • bering-png.png
    bering-png.png
    10 KB · Views: 614
The angle that says 375 should be 285 just to correct that.
I am trying to figure it out... But I Just can't see it, I think it may have to do something with opposite interior angles.
 
Richie Smash said:

Homework Statement


A ship sails 3 nautical miles from Port P on a course of 64° to Port Q, then changes course to 285° and sails a further 7 nautical miles to Port R.
(i) Draw a carefully labelled diagram of the entire route taken. Show the north direction where necessary.
(ii)Calculate the distance PR to three significant figures.
(iii) Determine the bearing of P from R.

Homework Equations

The Attempt at a Solution


I have drawn the diagram which i will post, as you can see I found angle PRQ to be 75° using alternate angles, and I found the exterior angles of the first two bearings by subtracting them from 360°.
But I can't seem to figure out the other two angles in the triangle to find the length, I could simply use the sine rule then
upload_2018-2-2_13-37-51.png
You found the yellow angle as 75° correctly. What is the pink angle then? The angle PRQ is not 75°.
If you know the pink angle, you can calculate the length PR, and then all angles can be determined.
 

Attachments

  • upload_2018-2-2_13-37-51.png
    upload_2018-2-2_13-37-51.png
    11 KB · Views: 590
  • Like
Likes Richie Smash
Oh I see Ehild...it makes a corresponding angle... and therefore it would be 180-64+75=41° and I can use the cosine rule... It's actually a bit hard to visualize.. I won't forget this.
 
Richie Smash said:
Oh I see Ehild...it makes a corresponding angle... and therefore it would be 180-(64+75)=41° and I can use the cosine rule... It's actually a bit hard to visualize.. I won't forget this.
Yes, go ahead.
 
  • Like
Likes Richie Smash
Yes I did it, using the cos rule the length is 5.13, and then for the bearing, if You extend a line from R and call the other point S then the angle NRS is 75° due to the same corresponding angles, so therefore angle NRQ would be 105°.
SO the bearing would be 105°+22.6°(angle PRQ) = 127.6° and it is very correct :) solved thanks a lot guys.
 
Back
Top