Find wavelength, frequency and speed of a wave,

AI Thread Summary
The discussion focuses on calculating the wavelength, speed, and frequency of a wave represented by a rope diagram. The wavelength was debated, with calculations suggesting it could be either 1.6 m or 3.2 m, ultimately concluding it is 3.2 m based on the total length of the rope and the number of waves. The speed of the wave was determined to be 0.8 m/s, calculated using the distance traveled and time taken. When considering a frequency change to 2.0 Hz, participants expressed uncertainty about the resulting speed and wavelength, highlighting confusion about the relationship between wave properties. The conversation emphasizes the distinction between traveling waves and standing waves, clarifying misconceptions about wavelength measurements.
selma
Messages
3
Reaction score
0
Member warned about posting without the homework template
upload_2016-1-1_23-37-35.png


So I was given this diagram to a wave of a rope.
the following questions i have to answer...

1) Find the wavelength in metres.
2) If the time that the wave takes to move from point X to point Y is 6.0 s, determine the speed of the wave and its frequency
3)Find the speed and wavelength if the frequency of the source changed to 2.0 Hz and explain your reasoning.

I have answered these three mostly but I am doubtful about how correct they are, especially #1 and #3

· Find the wavelength in metres ***(this question I feel was confusing because I wasnt sure if the wavelength is actually 1.6 m or 3.2m)

4.8m / 3 waves = 1.6m per wave

Wavelength is 2/3 of the total distance of rope.

2/3 = 0.67

4.8m x 0.67

Λ= 3.2m

The wavelength is 3.2 m.

· If the time that the wave takes to move from point X to point Y is 6.0 s, determine the speed of the wave and its frequencyΔd= 4.8m

Δt= 6.0 s

Λ= 3.2m

v= Δd/Δt

v= 4.8m/6.0s

v= 0.8m/s

The speed of a wave in this equation is 0.8 metres per second.



f= v/Λ

f= 0.8 m per second/3.2m

f= 0.25 Hz

The frequency of the wave in this equation is 0.25 Hz.3) · Find the speed and wavelength if the frequency of the source changed to 2.0 Hz and explain your reasoning. *****(I came up with several answers but was not really convinced any of them were right)
 
Physics news on Phys.org
selma said:
View attachment 93899

So I was given this diagram to a wave of a rope.
the following questions i have to answer...

1) Find the wavelength in metres.
2) If the time that the wave takes to move from point X to point Y is 6.0 s, determine the speed of the wave and its frequency
3)Find the speed and wavelength if the frequency of the source changed to 2.0 Hz and explain your reasoning.

I have answered these three mostly but I am doubtful about how correct they are, especially #1 and #3

· Find the wavelength in metres ***(this question I feel was confusing because I wasnt sure if the wavelength is actually 1.6 m or 3.2m)

4.8m / 3 waves = 1.6m per wave
Correct, there is three full wavelength along the rope, why do you think it is not true?
selma said:
Wavelength is 2/3 of the total distance of rope.

2/3 = 0.67

4.8m x 0.67

Λ= 3.2m

The wavelength is 3.2 m.

selma said:
· If the time that the wave takes to move from point X to point Y is 6.0 s, determine the speed of the wave and its frequencyΔd= 4.8m

Δt= 6.0 s

Λ= 3.2m

v= Δd/Δt

v= 4.8m/6.0s

v= 0.8m/s

The speed of a wave in this equation is 0.8 metres per second.
Correct.
 
Hi Ehild, thanks so much for your response, I read somewhere that generally the wavelength is 2/3 if the entire wave :S
 
selma said:
Hi Ehild, thanks so much for your response, I read somewhere that generally the wavelength is 2/3 if the entire wave :S
I do not understand. The wave is kind of motion, it has no length. The wavelength is the repeating part of the wave in space. In the figure, it is the length of the red piece of line, including one crest and one trough of the wave.
upload_2016-1-2_7-9-28.png
 
ehild said:
I do not understand. The wave is kind of motion, it has no length. The wavelength is the repeating part of the wave in space. In the figure, it is the length of the red piece of line, including one crest and one trough of the wave.
View attachment 93907
I am not sure but I did find that somewhere on that web, that generally wavelength is 2/3 of a wave in measurement
 
selma said:
I am not sure but I did find that somewhere on that web, that generally wavelength is 2/3 of a wave in measurement
What do you mean on "wave in measurement"? What kind of measurement?
A wave is a motion, it has no length. Have you seen water waves, coming in from the depth of a sea or from a lake towards the shore? Sound is also wave motion. You can hear the sound of thunderstorm from very far away, and you know that the wavelength of the sound is in the range of meters. Do you state that you can hear a bolt only if it is a few meter distance from you ?
You are confused with the standing waves appearing on a rope of finite length. If both ends of the rope are fixed, standing waves appear if the length of the rope L is integer multiple of the half wavelength, that is L=m(λ/2). In that case you get a pattern like in the figure below, but the figure in your first post showed a traveling wave.

https://qph.is.quoracdn.net/main-qimg-b7d7c2be0c89df2bdece35e64227b7b7?convert_to_webp=true
 
Last edited by a moderator:
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
Back
Top