Finding acceleration of elevator using mass

AI Thread Summary
To find the acceleration of the elevator, the normal force readings from the scale must be analyzed. The initial reading of 150 lbs represents the weight, while the varying readings of 120 lbs and 170 lbs indicate changes in acceleration. The equations of motion can be applied, where the net force equals the difference between the normal force and gravitational force. The mass can be calculated by converting the weight using the acceleration due to gravity. Consistent units are crucial for accurate calculations, and the weight readings provide the necessary values to determine the elevator's acceleration during its movement.
mjolnir80
Messages
54
Reaction score
0

Homework Statement


one day you take your bathroom scale with you into an elevator. the scale reads 150 lbs as the door closes. the reading varies between 120 lbs and 170 lbs as the elevator travels up. what is the acceleration of the elevator while its accelerating and decelerating?


Homework Equations


dynamics equations


The Attempt at a Solution


from the first part we know that the scale is telling us the normal force.Fg=Fn Fn=150lbs
for the accelerating phase F= Fn-Fg, ma=170lbs - mg
this is where i get stuck. where should i go from here?
 
Physics news on Phys.org
mjolnir80 said:
from the first part we know that the scale is telling us the normal force.Fg=Fn Fn=150lbs
The scale always gives the normal force. The initial reading tells you your weight (mg).
for the accelerating phase F= Fn-Fg, ma=170lbs - mg
this is where i get stuck. where should i go from here?
You're doing fine. Substitute the value of mg (the weight) and solve for "a". (Figure out your mass.)
 
Fn = mg (for the first part) m= Fn/ g is that the mass? the units don't really match though

and what do i substitute in for mg ? 150 lbs?
 
mjolnir80 said:
Fn = mg (for the first part) m= Fn/ g is that the mass?
Correct.
the units don't really match though
It's up to you to use consistent units. What's the value of g in the English system? What's the unit of mass?
and what do i substitute in for mg ? 150 lbs?
Yes.
 
thanks for the help
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top