Finding pressure in a diving bell

In summary, the problem involves finding the volume of air in Dan's diving bell after descending to a depth of 10 meters where the pressure doubles and the temperature drops to 7 °C. Using the equation P1 x V1/T1 = P2 x V2/T2, the attempt at a solution involves determining P1 and using it to find P2 and V2. However, P2 can be expressed in terms of P1 and the pressure at the surface is not needed.
  • #1
lillybelle14
1
0

Homework Statement


At the surface, where the temperature is 27 °C, the volume of air in Dan’s diving bell is 2 metres cubed. When he descends to a depth of 10 m the pressure doubles and the temperature drops to 7 °C. What volume of air does Dan have in his diving bell now?

Homework Equations


P1 x V1/T1 = P2 x V2/T2

The Attempt at a Solution


P1= ? P2= ?
V1= 2 metres cubed V2= ?
T1= 27 °C (300 Kelvin) T2= 7 °C (280 Kelvin)


Im having trouble finding out P1 and therefore I can't find out P2 and V2!
Please help me.
Thanks
 
Physics news on Phys.org
  • #2
lillybelle14 said:
Im having trouble finding out P1 and therefore I can't find out P2 and V2!
You don't need the actual pressure, just the fact that it doubles. Express P2 in terms of P1.

(Although: What's the pressure at the surface of the water?)
 

What is a diving bell?

A diving bell is a structure that allows divers to work underwater without having to resurface for extended periods of time. It is typically a large, bell-shaped chamber with an open bottom that is lowered into the water by a crane or cable.

What is the purpose of finding pressure in a diving bell?

Finding pressure in a diving bell is important because it allows divers to monitor and control the amount of pressure inside the bell. This is crucial for the safety of the divers, as too much pressure can lead to serious health risks such as decompression sickness.

How do scientists find pressure in a diving bell?

Scientists typically use a device called a pressure gauge to measure the pressure inside a diving bell. This gauge uses a diaphragm or a spring to indicate the amount of pressure being exerted on it. The measurement is usually given in units of pounds per square inch (psi) or bars.

What factors affect the pressure in a diving bell?

The pressure inside a diving bell is affected by several factors, including the depth of the bell, the temperature of the water, and the air supply to the bell. As the depth increases, the pressure also increases, and as the temperature decreases, the pressure also decreases.

What are the safety precautions for maintaining pressure in a diving bell?

To ensure the safety of divers, it is important to monitor and maintain the pressure inside a diving bell. This can be done by regularly checking the pressure gauge and adjusting the air supply to the bell as needed. It is also important to follow proper decompression procedures when resurfacing to avoid decompression sickness.

Similar threads

Thermodynamics problem. Have I answered this correctly?
    • Advanced Physics Homework Help
Replies
1
Views
873
Mixture of different gases at different temperatures
    • Advanced Physics Homework Help
Replies
5
Views
2K
Calculate these 5 temperatures along this Thermodynamic cycle
    • Introductory Physics Homework Help
Replies
4
Views
796
Helmholtz and Gibbs free energy for an adiabatic process
    • Advanced Physics Homework Help
Replies
14
Views
7K
I Mixing two different gases
    • Thermodynamics
Replies
3
Views
1K
Engineering Calculating the mass of air in a pressurised air tank
    • Engineering and Comp Sci Homework Help
Replies
14
Views
1K
Adiabatic Expansion of Pressurized Air in a Piston-Cylinder Setup
    • Introductory Physics Homework Help
Replies
8
Views
727
I When does the ideal gas equation break down?
    • Classical Physics
Replies
5
Views
1K
Thermodynamics: find the change of internal energy, the work and Q
    • Introductory Physics Homework Help
Replies
10
Views
1K
I Basic adiabatic expansion Question
    • Classical Physics
Replies
7
Views
1K

Hot Threads

Recent Insights

Back
Top