Finding the New Acceleration Given Point Charges

AI Thread Summary
A point charge of 15.00μC is fixed, while a sphere with a mass of 4.00×10−3kg and a charge of +2.00μC is fired towards it at 40.0 m/s. To find the acceleration of the sphere when its speed is 23.0 m/s, the force is calculated using Coulomb's law, resulting in 112.58 N after determining the new distance of 0.0487 meters through conservation of energy. The acceleration is then derived from the force divided by the mass, yielding 28144.5 m/s². The calculations confirm the approach and results are correct.
Alex Z
Messages
6
Reaction score
0

Homework Statement


A point charge q1=15.00μC is held fixed in space. From a horizontal distance of 8.00 cm , a small sphere with mass 4.00×10−3kg and charge q2=+2.00μC is fired toward the fixed charge with an initial speed of 40.0 m/s . Gravity can be neglected.
What is the acceleration of the sphere at the instant when its speed is 23.0 m/s?

2. The attempt at a solution
I tried to use F = (k*q*q) / (r^2) to find the force of the system, which comes out to be 41.72 N. But when I try to use a = F/m, the answer is apparently wrong.
 
Physics news on Phys.org
How did you calculate the force? (Where is the sphere when its speed is 23.0 m/s?)
 
Doc Al said:
How did you calculate the force? (Where is the sphere when its speed is 23.0 m/s?)
I calculated the force using everything was given to me. Since the radius of the sphere wasn't given, I just assumed that the size of the sphere was negligible and I therefore didn't have to take it into account.
As for the location of the sphere, I assume conservation of energy needs to be used to find the new distance?
 
Alex Z said:
I calculated the force using everything was given to me. Since the radius of the sphere wasn't given, I just assumed that the size of the sphere was negligible and I therefore didn't have to take it into account.
Sounds good.

Alex Z said:
As for the location of the sphere, I assume conservation of energy needs to be used?
Sure. If you show your calculations, we can look for possible errors. (Or confirm your results.)
 
Well I believe that the equation here would be Uei + Ki = Uef + Kf
So (k*q*q)/0.08 + 3.44 = (k*q*q)/rf + 1.137
With all this equated, rf should be equal to 0.0487 meters.

From there, my first instinct would be to find the change in distance and then use kinematics.
 
Show how you calculated the kinetic energies. (Check your arithmetic.)

Alex Z said:
From there, my first instinct would be to find the change in distance and then use kinematics.
Once you have the final position, you won't need kinematics.
 
Initial Kinetic Energy = 1/2*(4*10^-3)*(40^2) = 3.2
Final Kinetic Energy = 1/2*(4*10^-3)*(23^2) = 1.058

Oops. So that means that rf = 0.0487 meters. I guess the values weren't great enough to make a significant difference.
 
Now show how you calculated the force.
 
Doc Al said:
Now show how you calculated the force.

F = (k*q*q)/(r^2) = ((8.9*10^9)*(15*10^-6)*(2*10^-6)) / (0.0487^2) = 112.58 N

So from there, I can use F = m*a to find the acceleration:

a = F / m = (112.58) / (4*10^-3) = 28144.5 m/s^2

I believe that should be the final answer.
 
  • #10
Much better!
 
  • #11
Doc Al said:
Much better!

Awesome, thank you very much.
 
Back
Top