Finding the Right Module for Spur Gears

  • Thread starter Thread starter alphaomega@ho
  • Start date Start date
  • Tags Tags
    Gears module
AI Thread Summary
When calculating the module for spur gears, it's important to refer to the DIN 780 standard table for guidance. The discussion emphasizes rounding up calculated module values, such as 3.91 to 4, and rounding down when appropriate, like 3.45 to 3. This approach ensures that the chosen module aligns with standard sizes. Participants confirm that rounding is a common practice in gear design. Properly selecting the module is crucial for gear compatibility and performance.
alphaomega@ho
Messages
17
Reaction score
0
hello,

i am doing gear calculations
my problem: i get several point numbers for the module of the spur gear
din 780 suggest a standard table with modules
so i just have to wrap up my calculated modules, for example: 3.91 => 4 ?

thank you vm !
 
Engineering news on Phys.org
anyway can help me ?
 
someone, please ?
 
Yes - round up
 
oke thank you !
always round up or 3.45 => 3 ?
 
Thread 'Turbocharging carbureted petrol 2 stroke engines'

Thread 'Turbocharging carbureted petrol 2 stroke engines'

Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
View full post »

Thread 'HP Required to move a robot 10meters at 1.5m/sec'

I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
View full post »

Similar threads

Gearbox with single input, double output (at different RPM)
Replies
10
Views
2K
Calculating Spur Gear Transmissions - Step-by-Step Guide
Replies
3
Views
2K
How can I design a gear train to meet specific torque and RPM requirements?
Replies
2
Views
2K
Tabular Method for a Unique Spur Gear Differential System
Replies
2
Views
3K
A novel compound epicyclic gear system I can't seem to understand
Replies
1
Views
1K
Is Enveloping the Worm Gear Necessary for Optimal Tooth Contact with Spur Gears?
Replies
2
Views
2K
Why is the gear ratio reversed in a planetary gear system?
Replies
9
Views
3K
What is the Proper Involute Profile for Worm Gear Drive Teeth Design?
Replies
8
Views
5K
How to Calculate Forces on Sun Wheels in a Planetary Gear System?
Replies
2
Views
2K
Calculate Gear Ratio - Helical/Spur Gears
Replies
2
Views
2K

Hot Threads

Recent Insights

Back
Top