What happens when both inputs are closed in a flip-flop fluidic device?

esstephens
Messages
2
Reaction score
0
In a flip-flop fluidic (air logic) device like the one shown in the attachment what happens if both the C1 and C2 are closed for the truth table.
 
Engineering news on Phys.org
You're missing the attachment.

Also, I moved this to the EE forum.
 

Thread 'Underwater piezoelectric sensor array receive sensitivity'

Hi all I have some confusion about piezoelectrical sensors combination. If i have three acoustic piezoelectrical sensors (with same receive sensitivity in dB ref V/1uPa) placed at specific distance, these sensors receive acoustic signal from a sound source placed at far field distance (Plane Wave) and from broadside. I receive output of these sensors through individual preamplifiers, add them through hardware like summer circuit adder or in software after digitization and in this way got an...
View full post »

Thread 'Following up on the recent thread about Earth Resistance measurements'

I have recently moved into a new (rather ancient) house and had a few trips of my Residual Current breaker. I dug out my old Socket tester which tell me the three pins are correct. But then the Red warning light tells me my socket(s) fail the loop test. I never had this before but my last house had an overhead supply with no Earth from the company. The tester said "get this checked" and the man said the (high but not ridiculous) earth resistance was acceptable. I stuck a new copper earth...
View full post »
Thread 'Beauty of old electrical and measuring things, etc.'

Thread 'Beauty of old electrical and measuring things, etc.'

Even as a kid, I saw beauty in old devices. That made me want to understand how they worked. I had lots of old things that I keep and now reviving. Old things need to work to see the beauty. Here's what I've done so far. Two views of the gadgets shelves and my small work space: Here's a close up look at the meters, gauges and other measuring things: This is what I think of as surface-mount electrical components and wiring. The components are very old and shows how...
View full post »

Similar threads

Understanding Flip-Flop Truth & Excitation Tables
Replies
1
Views
2K
Understanding D and JK Flip Flops
Replies
5
Views
5K
Positive-Edge-Triggered JK flip-flops
Replies
10
Views
4K
Yenka simulator to build an RS flip-flop
Replies
8
Views
3K
Electronic NOT gate chip question
Replies
28
Views
4K
Constructing a JK Flip-Flop: Troubleshooting Unexpected Outputs
Replies
20
Views
3K
Engineering Designing a sequential circuit using JK flip flops
Replies
1
Views
2K
Need help in understand the Markers on electronic chips
Replies
6
Views
2K
Need help with a mod-6 counter using JK flip flops w/ control bit
Replies
1
Views
3K
Insights What Happens When You Flip the Light Switch? - Comments
Replies
47
Views
6K

Hot Threads

Recent Insights

Back
Top