Force needed to push box down incline plane

AI Thread Summary
To determine the force needed to push a 120N block down a 20-degree incline at constant speed, the friction force and the component of weight along the incline must be considered. The applied force to push the block up is 86N, which balances the weight component and friction. The coefficient of friction was calculated to be approximately 0.399. For the block to move down at constant speed, a force of about 3.9N is required. This analysis confirms the relationship between applied force, friction, and weight on an incline.
Physics_girl1
Messages
16
Reaction score
0

Homework Statement


a) if a force of 86N parallel to the surface of a 20 degree incline plane will push a 120N block up the plane at constant speed, what force parallel to the plane will push it down at constant speed?


Homework Equations


\SigmaF(X)=F(A)-F(fr)-mgcos\vartheta=0
\SigmaF(Y)=F(n)-mgsin\vartheta=o
where F(A)= force applied, F(fr)= friction force, F(n)= normal force, mg=weight, F(X)= sum of forces in x direction, and F(Y)- sum of forces in y direction


The Attempt at a Solution


normal force=41.0424
friction force=26.73
my answer is -86.0331
 
Last edited:
Physics news on Phys.org
my coefficient of friction for this problem=.652
 
could someone please check my answers?
 
Physics_girl1 said:

Homework Statement


a) if a force of 86N parallel to the surface of a 20 degree incline plane will push a 120N block up the plane at constant speed, what force parallel to the plane will push it down at constant speed?


Homework Equations


\SigmaF(X)=F(A)-F(fr)-mgcos\vartheta=0
\SigmaF(Y)=F(n)-mgsin\vartheta=o
where F(A)= force applied, F(fr)= friction force, F(n)= normal force, mg=weight, F(X)= sum of forces in x direction, and F(Y)- sum of forces in y direction


The Attempt at a Solution


normal force=41.0424
friction force=26.73
my answer is -86.0331

Physics_girl1 said:
my coefficient of friction for this problem=.652

Physics_girl1 said:
could someone please check my answers?

Hi
Writing out the equation for the force to push up the block with constant speed, i.e. net force is zero.
120 sin 20(component of weight along incline) +120 cos 20 * u(Force of friction, u is the coefficient)=86
solve for u
u=0.399
Now for the second part:
120 sin 20 +F=120 cos 20 *u
F=120 sin 20-120 cos 20 *u
F=3.9 N
dos this help?
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'A bead-mass oscillatory system problem'
I can't figure out how to find the velocity of the particle at 37 degrees. Basically the bead moves with velocity towards right let's call it v1. The particle moves with some velocity v2. In frame of the bead, the particle is performing circular motion. So v of particle wrt bead would be perpendicular to the string. But how would I find the velocity of particle in ground frame? I tried using vectors to figure it out and the angle is coming out to be extremely long. One equation is by work...
Back
Top