Force/Pressure - Easy Question I think

  • Thread starter Thread starter acgold
  • Start date Start date
AI Thread Summary
The discussion revolves around solving hydrostatic force problems related to a whale tank and a concrete form filled with liquid concrete. The first problem involves calculating the total force exerted by water on a 6 by 20-foot observation window, with the centroid depth identified as 9 feet. The second problem requires finding the force on a square foot side panel of a concrete form, using the specific gravity of the concrete. The relationship for calculating the hydrostatic force is highlighted, emphasizing that it is based on the pressure at the centroid multiplied by the area. The complexities of determining the exact point where the force acts, known as the center of pressure, are also noted.
acgold
Messages
16
Reaction score
0
We were doing simple P=\rho g h problems in class and then all of a sudden I ran into these two when I was doing my homework. We never went over this in class and I have no idea what to do.

1. A whale tank at the zoo is 15 feet deep and filled with sea water. A 6 foot tall by 20 foot wide observation window is on one wall. If the bottom of the window is 3ft above the floor of the tank, what total force does the water exert on the window?

2. Find the force on one square foot side panel that is on the side of a concrete form at the bottom. The form is filled with liquid concrete of specific gravity 2.62. The form is 5/6 ft thick x 8 ft wide x 8 ft tall.

I just need a little help to put me in the right direction. Any help would be much appreciated.
 
Physics news on Phys.org
I believe this is the relationship you need:

F=\rho g h_c A

F is the total force of the fluid acting on the submerged area, h_c is the vertical depth of the area's centroid, and A is the area you are considering. This says that the hydrostatic force acting on a plane area is equal to the pressure at the area's centroid times the area itself.

In the case of the first problem, the area is simply 6*20 ft^2, and the depth of the centroid should be 9 ft (window top is 6 ft from water's surface, window centroid is at the middle of the window).

You should be able to apply the same principle to the second problem.

The above is true for a submerged plane area regardless of its shape or orientation (horizontal, vertical, inclined, whatever). However, while the hydrostatic force is equal to the pressure at the centroid times the area, the force doesn't necessarily act through the centroid. It's more complicated to find exactly where the force acts (the so-called "center of pressure").
 
Last edited:
Great, answers came out like they should. Thanks a lot.
 
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanged mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top