Forces Acting on Mass M on Wedge

  • Thread starter Thread starter Gloyn
  • Start date Start date
  • Tags Tags
    Mass Wedge
AI Thread Summary
The discussion centers on the forces acting on a mass M placed on a frictionless sledge moving up a wedge with an angle α and a friction coefficient μ between the wedge and the sledge. The acceleration of the mass down the wedge is calculated as a = g(sinα + μcosα) when moving up, and a = g(sinα - μcosα) when moving down. The resultant force acting on the mass is derived as F = -mgμcosα, indicating that it points up the wedge when the mass is moving up. The reaction forces from the plates are also discussed, highlighting that the mass pushes against the right plate when moving up and the left plate when sliding down. The conversation emphasizes the importance of correctly applying Newton's laws to determine the forces involved.
Gloyn
Messages
40
Reaction score
0

Homework Statement


We have a body of mass M placed in a kind of sledge like on the picture:
imgJPG_xsrqhxq.JPG


Coefficient of fristion between the mass and the sledge is zero, but the coefficient of friction between the wedge and the sledge is μ. Angle of the wedge is α. The sledge is massles. The slegde is pushed with some initial velocity up the wedge. What are the forces that the mass M acts with on the plates at the sides of the sledge?

Homework Equations



Inertial force: F_I=-ma
2nd Newten s Law F=ma

The Attempt at a Solution



If the sledge was not moving, the force acting on the left plate would be F=mg*sinα, but since it is moving, we calculate the acceleration down the wedge, which is:

ma=mg*sinα+mgμ*cosα -> a= g(sinα+μ*cosα)

So the resultant force is:

F=mg*sinα-(mg*sinα+mgμ*cosα)=-mgμ*cosα

and it points up the wedge. Is that right?
 
Physics news on Phys.org
I sort of agree with you but would quibble over the wording.

The resultant force is always given by ma.

When going up the slope a=g(sinα+μ*cosα)
But when going down a=g(sinα-μ*cosα)
Resultant F=ma=mg*sinα+ reaction force from plates.
Reaction force from plates=±mgμ*cosα
So when going up the slope the mass is pushing on the plate to the right in your diagram, but when sliding down pushes on the left hand plate.
 
You're right of course :) Thanks for help!
 
Thread 'Collision of a bullet on a rod-string system: query'
In this question, I have a question. I am NOT trying to solve it, but it is just a conceptual question. Consider the point on the rod, which connects the string and the rod. My question: just before and after the collision, is ANGULAR momentum CONSERVED about this point? Lets call the point which connects the string and rod as P. Why am I asking this? : it is clear from the scenario that the point of concern, which connects the string and the rod, moves in a circular path due to the string...
Thread 'A cylinder connected to a hanged mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top