Forces on Equilateral triangle truss

AI Thread Summary
The discussion focuses on analyzing the forces acting on an equilateral triangle truss with a known force F applied at the top in the x direction. The user has calculated moments at both supports to be (½)F and determined that member AD experiences a force equal to F, while member AB is calculated to have zero force. The inquiry seeks validation of these findings and requests others to share their calculations for better understanding. Clarification on the reasoning behind the zero force in member AB is also sought. The conversation emphasizes the importance of showing work to facilitate collaborative problem-solving.
tom676
Messages
2
Reaction score
0
Hey Guys,

My question involves finding all of the forces acting upon each member. It is known that each side of the triangle has a length of l. It is also known that the force is acting at the very top of the triangle in the x direction (to the right) labelled as F.

Attempt:
I found moments at both supports (bottom left + bottom right) to be (½)F. I have found that AD = F and for some reason AB = 0?

Is this incorrect?
 
Last edited:
Engineering news on Phys.org
500px-Equilateral_triangle_cut_to_4_svg.png
 
How about showing the work you have done so we can see how you are thinking? That would help a lot.
 
Thread 'Turbocharging carbureted petrol 2 stroke engines'
Hi everyone, online I ve seen some images about 2 stroke carbureted turbo (motorcycle derivation engine). Now.. In the past in this forum some members spoke about turbocharging 2 stroke but not in sufficient detail. The intake and the exhaust are open at the same time and there are no valves like a 4 stroke. But if you search online you can find carbureted 2stroke turbo sled or the Am6 turbo. The question is: Is really possible turbocharge a 2 stroke carburated(NOT EFI)petrol engine and...
I need some assistance with calculating hp requirements for moving a load. - The 4000lb load is resting on ball bearing rails so friction is effectively zero and will be covered by my added power contingencies. Load: 4000lbs Distance to travel: 10 meters. Time to Travel: 7.5 seconds Need to accelerate the load from a stop to a nominal speed then decelerate coming to a stop. My power delivery method will be a gearmotor driving a gear rack. - I suspect the pinion gear to be about 3-4in in...
Back
Top