Frequency of a Spark Timer, 0.10s

AI Thread Summary
The frequency of a spark timer set at a period of 0.10 seconds is calculated to be 1.0 x 10¹ Hz. The discussion clarifies that the period is the reciprocal of the frequency, with the formula being frequency (in hertz) = 1 / period (in seconds). The example provided indicates that six sparks occur over 60 seconds, resulting in one spark every 10 seconds. This leads to the conclusion that there are six sparks per minute, which translates to a frequency of 1 Hz. The explanation helps clarify the concept of frequency for the original poster.
nmichelle
Messages
2
Reaction score
0
Hey, I just signed up and I've already got a question. =)
The answer was in the book but I don't get the answer.

Determie the frequency of a spark timer set at a period of 0.10s.
Ans: 1.0 x 10¹ Hz.

The book only says;
"An intervl of six spaces produced by a spark timer represents a time of 0.10s. The period of vibration, which is the time between successive dots, is the reciprocal of the frequency.

6/60s = 0.10s
The answer is literally staring me right in the face and the explanation might be really easy but for it's just not making sense to me. Can anyone help? Thanks a lot!
 
Physics news on Phys.org
Frequency(in hertz) = 1 / period (in seconds). I can't really explain it any other way without writing several paragraphs but that's mostly to my rambling nature. 1 Hertz = s^(-1) or (cycles/second) depending on how you look at it.
 
Last edited by a moderator:
Since there are 6 sparks in 60 seconds, there is is one spark every 10 seconds. How many sparks per second? Or, even easier, how many sparks per minute?

Now what does "frequency" MEAN??
 
Ah. I think I get it now. Thanks a lot!
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
Back
Top