Gravitational Forces and Torque Reviews

AI Thread Summary
The discussion covers various physics problems related to gravitational forces and torque. In problem 47, the calculation for the horizontal force exerted by a partner on a trapeze artist is confirmed as correct at 462N. Problem 65 highlights confusion regarding potential energy, emphasizing the need to clarify whether the 5m refers to height or length, with the correct answer being 200J if the height is 5m. For problem 68, the approach to calculating the child's final velocity is debated, with suggestions to consider the relationship between applied force, friction, and acceleration. Lastly, in problem 100, the calculation of rotational kinetic energy is questioned, particularly regarding the angular velocity derived from the bucket's speed.
python023
Messages
12
Reaction score
0
Here are some problems that I have figured out. Am I doing them right?

47.) A trapeze artist weighs 800N. The artist is momentarily held to one sid of a swing by a partner so that both of the swing ropes are at an angle of 30.0 degrees with the vertical. In such a condition of static equilibrium, what is the horizontal force being applied by the partner?

tan30 = opp/800. F = 800tan30 = 462N. Is this right?

65.) A 40.0N crate is pulled uip a 5.0m inclined plane at a constant velocity. If the plane is inclined at an angle of 37 degrees to the horizontal and there is a constant force of friction of 10.0 N between the crate and the surface, what is the net gain in potential energy by the crate?

Potential Energy = mgh. (40*5)-(40*0) = 200 J. However, the choices for this question are 120J, -120J, 210J, -210J. What am I doing wrong here?

68.) A child riding a bicycle has a total mass of 40.0kg. The child approaches the top of the hill that is 10.0m high and 100.0m long at 5.0 m/s. If the force of friction between the bicycle and the hill is 20.0N, what is the child's velocity at the bottom of the hill?

Force of gravity causes a force of 392.4N, 392.4cos84.26 = the applied force results in 39.25N. Net force = 19.25N, which gives a final velocity of 11 m/s. Is this correct?

85.) To warm up before a game, a baseball pitcher tosses a 0.15kg ball by rotating his forearm, which is 0.32m in length, to accelerate the ball. The ball starts at rest and is thrown at a speed of 12 m/'s in 0.40s. While the ball is in the pitcher's hand, what torque is applied to the ball to produce the angular acceleration?

I calculated that the acceleration created from his arm = 30 rad/sec^2. Torque = moment of inertia * ang. acceleration. I am missing my other paper of notes but my final calculations yield an answer of 1.4 N-m. Is this correct?

96.) A grinding wheel with a moment of inertia of 2.0kg-m^2 is initially at rest. What angular momentum will the wheel have 10.0 s after a 2.5 N-m torque is applied to it?

I calculated angular acceleration to = 1.25 rad/sec^2. Multiplied by 10 secs, that gives an angular speed of 12.5 rad/sec. Multiplied by the moment of inertia gives 25 kg-m/s^2 of Angular momentum. Is this correct?

100.) A bucket filled with water has a mass of 23kg and is attached to a rope that is woundwith a crank arounda 0.05m radius cylinder at the top of a well. The moment of inertia of the cylinder and crank is 0.12kg-m^2. The bucket and water are first raised to the top of the well and then released to fall back into the well. What is the rotational kinetic energy of the cylinder and crank at the instant the bucket is moving at a speed of 7.9 m/s?

I calculated that it took .81 s for the bucket to fall to a speed of 7.9 m/s. I calculated that the angular speed was 81.65 rad/sec. KE = (1/2)Iw^2 = (1/2)(.12)(81.65^2) = 400 Joules. Is this correct?
 
Physics news on Phys.org
47 is correct
65 - the h in the potential energy formula represents the HEIGHT change
what is 5m? Is it the HEIGHT of the ramp or the length of the ramp? Draw a diagram if you are still confused

you're going to have to be more speific on 68 coz I am not sure what ur thought pattern was there
 
Last edited:
65 - the h in the potential energy formula represents the HEIGHT change
what is 5m? Is it the HEIGHT of the ramp or the length of the ramp? Draw a diagram if you are still confused

If the hypotenuse was 5m, then the answer would be 120J. If the length of the base was 5.0m, the answer would be 150J, no a possible choice. If the Height was 5.0m, the answer would be 200J, nota possible choice.

68.) The angle between the force of gravity and the surface the child is riding on create an angle that can be used to determine the "applied force", right? Then, the net force, applied - frictional, is equal to mass * acceleration. Final Velocity^2 = Initial Velocity^2 + 2(acceleration)(distance). Choices are a.) 5.0 m/s b.) 10.0m/s c.) 11 m/s.
Cant be A as gravity would only increase the final velocity.
 
on 100, if the bucket is going at 7.9 m/s, then w=7.9/r, with r=0.05m?

I think your angular velocity is suspect...
 
100.) w = 81.65 radians / sec. Its translation motion, in free fall due to gravity is falling at a rate of 7.9 meters per sec.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top