Head on Collision with a car physics

AI Thread Summary
In a head-on collision between a dump truck and a subcompact car, both vehicles experience equal forces due to Newton's third law, but the truck sustains less damage because of its stronger construction. The discussion highlights that the truck's greater mass results in a smaller acceleration during the collision, leading to less force experienced by the truck driver compared to the car driver. By applying momentum conservation principles, the final speed of the combined vehicles can be calculated, demonstrating that the truck maintains a velocity closer to its initial speed. Consequently, the truck driver experiences a smaller force from the seatbelt, making it safer to be in the truck during such an event. Overall, the physics of the collision illustrates why being in a larger vehicle is advantageous in a head-on crash.
shamockey
Messages
5
Reaction score
0
Lost in this review problem:

Most of us know intuitively that in a head-on collision between a large dump truck and a subcompact car, you are better off being in the truck than in the car. Why is this? Many people imagine that the collision force exerted on the car is much greater than that experienced by the truck. To substantiate this view, they point out that the car is crushed, whereas the truck is only dented. This idea of unequal forces, of course, is false. Newton's third law tells us that both objects experience forces of the same magnitude. The truck suffers less damage because it is made of stronger metal. But what about the two drivers? Do they experience the same forces? Suppose that each vehicle is initially moving at 6.40 m/s and that they undergo a perfectly inelastic head-on collision. Each driver has mass 81.0 kg. Including the drivers, the total vehicle masses are 830 kg for the car and 3800 kg for the truck. The collision time is 0.150 s.


(a) What force does the seat belt exert on the truck driver?

(b) What force does the seat belt exert on the car driver?

how do i go about solving this? Thanks in advance
 
Physics news on Phys.org
This is a momentum problem. Find the final speed of the car/truck combination: m1v1+m2v2=m3v3. Then subtract that speed from the speeds of each driver to find the total change in speed for each. Divide by time to find the acceleration felt by each driver. Use f=ma to find the force.
 
Choose a positive direction, so that from the conservation of momentum:

m_tv_{0t} - m_cv_{0c} = (m_t + m_c)v_f,
where we take the direction of the truck initial velocity as positive

Then, since v_{0t} and v_{0c} have the same magnitudes,

(m_t - m_c)v_0 = (m_t + m_c) v_f
or
v_f = \frac{m_t - m_c}{m_t + m_c}v_0

Because the mass of the truck is greater than that of the car, then numerator m_t - m_c will be positive, meaning that the final velocity of the combined system (truck + car) will still be in the direction of the truck. Observe that the greater m_t is in comparison with m_c, the closer will the final velocity be to the truck initial velocity!
Therefore, the truck experiences less acceleration (same direction of velocity) than the car does (direction of velocity is reversed), and the same is true for the corresponding drivers. Hence a driver would rather prefer to be in the truck during the collision because a smaller acceleration would mean a smaller force as well (F = ma).
 
Last edited:
Thank you very much
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
Thread 'Voltmeter readings for this circuit with switches'
TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...

Similar threads

Replies
9
Views
4K
Replies
5
Views
3K
Replies
8
Views
5K
Replies
4
Views
2K
Replies
4
Views
4K
Replies
3
Views
3K
Replies
8
Views
3K
Replies
14
Views
8K
Back
Top