Heat Conduction with Insulated Ends

k.kuhlmann
Messages
1
Reaction score
0

Homework Statement


Let the ends of a copper rod 100 cm long be maintained at 0 degrees C. Suppose that the center of the bar is heated to 100 degrees C by an external heat source and that this situation is maintained until a steady state results. Find this steady-state temperature distribution.


Homework Equations


I think this involves the Fourier Series but I'm not sure.


The Attempt at a Solution


I'm not sure how to start it. I haven't seen a problem like this where it is heated from the middle.
 
Physics news on Phys.org
Hi k.kuhlmann, welcome to PF!

One way to approach this problem is to use the heat equation for steady state

\frac{d^2T}{dx^2}=0

and solve it (integrate it twice, for example) at either the left or right side of the rod (they're reflectively symmetric, of course) with the temperature boundary conditions that you're given. Does this make sense?
 
Hello everyone, I’m considering a point charge q that oscillates harmonically about the origin along the z-axis, e.g. $$z_{q}(t)= A\sin(wt)$$ In a strongly simplified / quasi-instantaneous approximation I ignore retardation and take the electric field at the position ##r=(x,y,z)## simply to be the “Coulomb field at the charge’s instantaneous position”: $$E(r,t)=\frac{q}{4\pi\varepsilon_{0}}\frac{r-r_{q}(t)}{||r-r_{q}(t)||^{3}}$$ with $$r_{q}(t)=(0,0,z_{q}(t))$$ (I’m aware this isn’t...
Hi, I had an exam and I completely messed up a problem. Especially one part which was necessary for the rest of the problem. Basically, I have a wormhole metric: $$(ds)^2 = -(dt)^2 + (dr)^2 + (r^2 + b^2)( (d\theta)^2 + sin^2 \theta (d\phi)^2 )$$ Where ##b=1## with an orbit only in the equatorial plane. We also know from the question that the orbit must satisfy this relationship: $$\varepsilon = \frac{1}{2} (\frac{dr}{d\tau})^2 + V_{eff}(r)$$ Ultimately, I was tasked to find the initial...
Back
Top