Help glider on an airtrack problem

  • Thread starter Thread starter physics_challenged
  • Start date Start date
AI Thread Summary
A glider on a frictionless air track is released and reaches a speed of 24 cm/s after traveling 50 cm, leading to an acceleration of 5.76 cm/s². To find the angle of inclination, the weight component along the track must be expressed in terms of the angle using trigonometry. The relationship between the gravitational force and the acceleration can be applied using F = ma to solve for the angle. A diagram is recommended to visualize the forces involved. The discussion emphasizes the importance of understanding the forces acting on the glider to determine the angle accurately.
physics_challenged
Messages
4
Reaction score
0
Help...glider on an airtrack problem

In the physics laboratory, a glider is released from rest on a frictionless air track inclined at an angle similar to the one shown in the figure below . If the glider has gained a speed of 24 cm/s in traveling 50 cm from the starting point, what was the angle of inclination of the track?

Ok, what I have done is I figured out the acceleration to be 5.76. Would that be correct? And now I am having trouble trying to get the angle...I am not sure what to do. Please help. :frown:
 
Physics news on Phys.org
5.76 cm/s^2 is the acceleration if the speed is the ending speed not the speed over time. The way I would find the angle from there is to find the weight of the glider and use the force of gravity and the horizontal force to get the angle using a tangent
 
physics_challenged said:
Ok, what I have done is I figured out the acceleration to be 5.76.
Right, the acceleration is 5.76 cm/s^2 (or 0.0576 m/s^2).
And now I am having trouble trying to get the angle...I am not sure what to do.
What's the component of the weight along the track? (Draw a diagram; express the force along the track in terms of the angle--using a little trig.) Then apply F = ma, using what you calculated as the acceleration along the track. Then solve for the angle.
 
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top