How can you determine if there is a moment and how does it works?

  • Thread starter Thread starter bogoa
  • Start date Start date
  • Tags Tags
    Moment Works
AI Thread Summary
Determining the moment of a force involves calculating its magnitude using the formula Fd, where F is the force and d is the distance from the point to the line of application. For couples, which consist of equal and opposite forces, the direction (clockwise or counterclockwise) is typically specified or can be observed visually based on the force's application. Understanding the interaction of forces helps in determining their moments effectively. The discussion emphasizes the importance of recognizing how forces react in relation to their pivot points. Overall, clarity in identifying the direction of moments is crucial for accurate calculations.
bogoa
Messages
7
Reaction score
0
how can you determine if there is a moment and how does it works?
 
Engineering news on Phys.org
Welcome to PF!

Hi bogoa! Welcome to PF! :wink:
bogoa said:
how can you determine if there is a moment and how does it works?

Do you mean the moment of a force?

Any force has a moment about any point that does not lie on the line of application of the force.

The moment has magnitude Fd, where F is the force and d is the distance from the point to the line. :smile:
 


ahh..but how can you determine the counter clockwise and clockwise method in moment of couples??
 
bogoa said:
ahh..but how can you determine the counter clockwise and clockwise method in moment of couples??

Of couples?

If by couple you mean a pair of equal and opposite forces, then usually you'll be told whether it's clockwise or counter clockwise … how else would a couple be specified?

Or if you mean the moment of a single force, it's usually obvious whether it's clockwise or counter clockwise, just by looking at it … if the force is going clockwise of the pivot, then it's clockwise!

If that's not clear, give an example where you're not sure how to determine whether it's clockwise or counter clockwise. :smile:
 


ah..thanks by the way..i've just got the answer my friend!now i can determine how to use counter and clockwise method by determining how the two force will react. and it will depend on the value of forces...
 
I have Mass A being pulled vertically. I have Mass B on an incline that is pulling Mass A. There is a 2:1 pulley between them. The math I'm using is: FA = MA / 2 = ? t-force MB * SIN(of the incline degree) = ? If MB is greater then FA, it pulls FA up as MB moves down the incline. BUT... If I reverse the 2:1 pulley. Then the math changes to... FA = MA * 2 = ? t-force MB * SIN(of the incline degree) = ? If FA is greater then MB, it pulls MB up the incline as FA moves down. It's confusing...
Hi. I noticed that all electronic devices in my household that also tell time eventually lag behind, except the ones that get synchronized by radio signal or internet. Most of them are battery-powered, except my alarm clock (which runs slow as well). Why does none of them run too fast? Deliberate design (why)? Wrong temperature for quartz crystal? Decreasing battery voltage? Or just a coincidence?
Back
Top