How do electrical charges attract/repel each other

AI Thread Summary
Electrical charges exhibit attraction and repulsion based on their polarity, with like charges repelling and opposite charges attracting. In the given scenario, charge C is influenced by both charge A and charge B, which are both positive and thus repel charge C. To determine the resultant vector on charge C, one must consider the directions of the forces exerted by charges A and B on it, rather than the forces charge C exerts on them. Charge C will experience forces pulling it leftward and slightly downward due to the repulsion from charges A and B. Understanding these directional forces clarifies the resultant vector's direction for charge C.
DrKARMA
Messages
4
Reaction score
0
Ok. I understand like repel and opposite attract. There are these physics homework with 3 charges and find the force from 2 of them on one. I understand the math: the only problem is my signs are wrong due to not understanding the direction of the force.

For example,
There's a positive charge (A) on origin. There's a positive charge (B) 4 meters up. There's a neg charge (C) 3 meters x-axis and 4 meters y axis. Find the resultant vector on charge 3?

For me, I would make charge 3 my main object. It would then attract and pull Charge B, making a vector to the SOutheast. It would then pull charge A to the NE direction. Then the resultant vector would be to right. But I am wrong.


I am literally confused. I do not know which direction to draw the vectors pointing. Please help. Thank you in advance.
 
Physics news on Phys.org
If you're trying to find the vector of charge C, then you need to find out which direction the other 2 charges are pulling on it, not which way charge C is pulling the other two.
 
So the resultant is to the left?
 
DrKARMA said:
So the resultant is to the left?

If opposite charges attract, then charge C is attracted towards charge B, correct?
And it also is attracted towards charge A.
Since both A and B are to the left of C, I'd say that is correct. It should have a vector left and a little down.
 
Alright thanks. I think I get it now
 
Thread 'Inducing EMF Through a Coil: Understanding Flux'
Thank you for reading my post. I can understand why a change in magnetic flux through a conducting surface would induce an emf, but how does this work when inducing an emf through a coil? How does the flux through the empty space between the wires have an effect on the electrons in the wire itself? In the image below is a coil with a magnetic field going through the space between the wires but not necessarily through the wires themselves. Thank you.
Thread 'Griffith, Electrodynamics, 4th Edition, Example 4.8. (Second part)'
I am reading the Griffith, Electrodynamics book, 4th edition, Example 4.8. I want to understand some issues more correctly. It's a little bit difficult to understand now. > Example 4.8. Suppose the entire region below the plane ##z=0## in Fig. 4.28 is filled with uniform linear dielectric material of susceptibility ##\chi_e##. Calculate the force on a point charge ##q## situated a distance ##d## above the origin. In the page 196, in the first paragraph, the author argues as follows ...
Back
Top