How Do Protons Hit a Target Under Electric Field Influence?

AI Thread Summary
Protons projected at an initial speed of 9550 m/s into a uniform electric field of 720 N/C must hit a target 1.27 mm away. Two projection angles, approximately 37 degrees and 53 degrees, allow for this hit, derived from the equations of projectile motion. The calculations involve using the relationship between horizontal distance, gravitational force, and electric field influence. The total flight duration for each trajectory is approximately 0.22 microseconds. The discussion emphasizes the importance of accurately calculating the electric force and trajectory angles for successful targeting.
an_mui
Messages
47
Reaction score
0
Protons are projected with an initial speed of v0 = 9550 m/s into a region in which a uniform electric field E = 720N/C [down] is present. The protons are to hit a target that lies a horizontal distance of 1.27mm from the point at which the protons are launched.

a) find the two projection angles theta that will result in a hit
b) what is the total duration of flight for each of the two trajectories?

a) equations for projectile motion
(1) x = v0 cos (theta) t
(2) y = v0 sin (theta) t - 1/2gt^2

gelec = |field| / mass = |qfield x E| / m

x = (R, 0) where R = 1.27mm = 1.27 x 10^-3 m

solve equation 2 for t. t = 0 or t = 2v0sin theta / g (we use this one)

(3) R = 2Vo^2 sin (theta) cos (theta) / gelec
(4) sin (theta) cos (theta) = A = a number

square equation (4) : sin (theta)^2 cos (theta)^2 = A^2
sin (theta)^2 (1 - sin (theta)^2) = A^2
sin (theta)^4 - sin (theta)^2 + A^2 = 0

using quadratic equation ... Let x be sin (theta)^2

x^2 - x + A^2 = 0
1 +/- (1 - 4A^2)^1/2 <--- equation 5
---------------------
2

a) theta = inverse sin (sqrt x)
= 53 or 37 degrees.

I'd really appreciate it if someone could check my work / answer over for me. Thanks in advance.

b) t = (2vosintheta) / g
= 2.2 x 10^-7 s
 
Physics news on Phys.org
Check your calculations. I am getting ~ 5 and 85 degrees.

(3) R = 2Vo^2 sin (theta) cos (theta) / gelec

After this, you can simplyfy your calculation a lot by using the fact that,
2sin(theta)cos(theta)= sin(2theta)

So you have sin(2theta)= 2*A = a number and solve for theta.
You will get the second value for theta by knowing that sin(pi - theta)= sin (theta).

Hope this helps.
 
hm . i still got 37 and 53 degrees using your method, i guess i might've calculated my A value wrong then.

this is what i got.

R = 2 Vo^2 sin (theta) cos (theta) / gelec

R = 1.27 x 10^-3
gelec = |Felec| / mass = |qfield x E| / m
= (1.6 x 10^-19)(720) / 1.67 x 10^-27
= 6.898 x 10^10
Vo = 9550

sin (theta) cos (theta) = (R x g elec) / 2Vo^2
= 0.48
= A
 
I used the electron mass. Sorry. You are right. I get ~37 and 53 deg.s now and t = 0.22 micro secs.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top