How Is Centripetal Acceleration Calculated in Astronaut Training Centrifuges?

  • Thread starter Thread starter Nb
  • Start date Start date
  • Tags Tags
    Accleration
AI Thread Summary
Centrifuges are essential in astronaut training to help individuals endure high accelerations. The discussion focuses on calculating the angle of rotation when the centripetal acceleration equals four times Earth's gravity. Given an angular acceleration of 0.25 rad/s² and a distance of 3.0 m from the axis, the centripetal acceleration is derived using the formula a = rω². By substituting the known values, it is determined that the angle of rotation is approximately 86.3 degrees when the required centripetal acceleration is achieved. This calculation highlights the critical relationship between angular motion and centripetal forces in astronaut training.
Nb
A centrifuge is used for training astronauts to withstand large accelerations. It consists of a chamber (in which the astronaut sits) that is fixed to the end of a long horizontal and rigid pole. The arrangement is rotated about an axis perpendicular to the pole’s free end. Such a centrifuge starts from rest and has an angular acceleration of 0.25 rad/s2. The chamber is 3.0 m from the axis of rotation. Through what angle has the device rotated when the centripetal acceleration experienced by an astronaut in the chamber is four times the acceleration due to the earth’s gravity?


i know that the angle= tan^-1 (a/w) to calculate a is a=(ac^2+at^2)^(1/2) but from this point i don't know what to do .
 
Physics news on Phys.org
I may be over-simplifying here, but doesn't the problem only ask you to consider the centripetal acceleration? If so, I think the tangential acceleration is irrelevant; simply set rω^2 = 4g and then find the angle this occurs at due to the constant acceleration, α of the centrifuge (Δ(ω^2;) = 2*α*Δθ).
 


Firstly, it is important to understand the concept of centripetal acceleration. Centripetal acceleration is the acceleration experienced by an object moving in a circular path, towards the center of the circle. In this case, the astronaut in the chamber is experiencing centripetal acceleration due to the rotation of the centrifuge.

To find the angle through which the device has rotated, we can use the formula: θ = tan^-1 (a/w), where θ is the angle, a is the centripetal acceleration, and w is the angular acceleration.

We are given that the angular acceleration, w = 0.25 rad/s^2. We also know that the centripetal acceleration experienced by the astronaut is four times the acceleration due to the earth's gravity, which is 9.8 m/s^2.

Using the formula for centripetal acceleration, a = (ac^2 + at^2)^(1/2), we can substitute the known values to get:

4 x 9.8 m/s^2 = (ac^2 + (0.25 rad/s^2)^2)^(1/2)

Solving for ac, we get:

ac = 6.2 m/s^2

Now, we can substitute this value for ac in the formula for θ:

θ = tan^-1 (6.2 m/s^2 / 0.25 rad/s^2)

Solving for θ, we get:

θ = tan^-1 (24.8)

θ = 86.3 degrees

Therefore, the device has rotated through an angle of approximately 86.3 degrees when the centripetal acceleration experienced by the astronaut is four times the acceleration due to the earth's gravity.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top