How Is Magnetic Field Generated by a Stream of Protons?

  • Thread starter Thread starter PhysicsChick
  • Start date Start date
  • Tags Tags
    Magnetism Protons
AI Thread Summary
A stream of protons at a rate of 10^9 protons/second generates a magnetic field that can be calculated using the formula B = (μ0 * I) / (2 * π * r). The correct value to use is the permeability of free space (μ0), not the permittivity (ε0). By substituting the given values into the formula, the resulting magnetic field at a distance of 2.0 meters from the beam is approximately 6.4 x 10^-11 Tesla. This magnetic field, while small, is measurable and can influence nearby objects. Understanding this calculation is essential for applications in physics and engineering.
PhysicsChick
Messages
2
Reaction score
0
A stream of protons passes a given point in space at a rate of 10 E9 protons/second. What mafnetic fiel do they produce 2.0 m from the beam?
i think i would use
I= 1.6 E-19x10 E 9
and then
B=(permativity of free space x I)/(2pir) using 2.0 as r? am i totally off or close?
 
Physics news on Phys.org
permittivity of free space = ε0 = 8.85 x 10-12 C2/Nm2

permeability of free space = μ0 = 4Π x 10-7 Tm/A

Are those close, or totally off?

In this case, you want μ0 (permeability), not ε0.
 


Your approach is correct. The magnetic field produced by a stream of protons can be calculated using the formula B = (μ0 * I) / (2 * π * r), where μ0 is the permeability of free space, I is the current (in this case, the rate of protons passing a point per second), and r is the distance from the beam.

Plugging in the values given in the question, we get B = (4π * 10^-7 * 1.6 * 10^-19 * 10^9) / (2 * π * 2.0) = 6.4 * 10^-11 Tesla. This is a very small magnetic field, but it is still measurable and can have an effect on nearby objects.
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top