How Is the Total Momentum Calculated in a Two-Car Collision?

AI Thread Summary
In a two-car collision involving identical cars each weighing 1350 kg and traveling at 25 m/s, the total momentum calculation requires determining the x and y components of each car's momentum based on their angles. Initially, the user calculated the momentum components incorrectly, leading to an erroneous total momentum of 65199 kgm/s. After recognizing that the x components of momentum are in opposite directions, the user corrected the x component for car B and recalculated the total momentum. The final correct total momentum for the system is approximately 47730 kgm/s. This demonstrates the importance of accurately accounting for direction in momentum calculations.
mybrohshi5
Messages
365
Reaction score
0

Homework Statement



Two identical cars (m = 1350 kg) are traveling at the same speed (25 m/s). Car A is going 30 degrees East of North and car B is going 60 degrees West of North. What is the magnitude of the total momentum of the two-car system.

Homework Equations



p = mv

The Attempt at a Solution



I found the x and y components of the momentum of each car. Then i added the similar components together. So then to find the momentum of the system i took the sqrt of the x and y components squared and added together.

x component car A
1350kg(25m/s)(cos60) = 16875

x component of car B
1350kg(25m/s)(cos30) = 29228

Total x component momentum = 46103y component of car A
1350kg(25m/s)(sin60) = 29228

y component of car B
1350kg(25m/s)(sin30) = 16875

Total y component momentum = 46103so the total momentum of the system is

P_total = sqrt ((46103^2) + (46102^2))

P_total = 65199 kgm/s

This is wrong though.

The correct answer is 47700 kgm/s

Can anyone help me get the right answer.

Thank you :)
 
Physics news on Phys.org
x components of momentum are in the opposite direction.
So
total x component momentum = ...?
 
x component of car B is actually

-29228 so the total x component is -12353

so the total momentum of the system is

P_total = sqrt ((46103^2) + (-12353^2))

P_total = 47730kgm/s

:)

Thank you
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top