How Much Energy and Money Does Switching to a Compact Fluorescent Lamp Save?

  • Thread starter Thread starter mz19
  • Start date Start date
  • Tags Tags
    Electrical
AI Thread Summary
Switching from a 100-W incandescent bulb to a 20-W compact fluorescent lamp saves 80 watts per hour. Over a lifespan of 10,000 hours, this results in a total energy savings of 800,000 watt-hours, or 80 kWh. At a rate of $0.10 per kilowatt-hour, this equates to a monetary savings of $8.00. The calculations confirm that the switch to compact fluorescent lamps is both energy-efficient and cost-effective. Overall, using compact fluorescent lamps can lead to significant savings in energy consumption and costs.
mz19
Messages
7
Reaction score
0
A.) A 20-W compact fluorescent lamp replaces a 100-W incandescent bulb. How much energy does it save over its 10,000 hour lifetime?
B.) At $0.10 per kilowatt-hour, how much money does this save?

My attempt at answering:

Difference is wattage is 80-W, multiplied by 10,000 hours is 800,000 (not sure of the label here, is it Kilowatt hours?) saved.

Is part B just multiplying the 800,000 (UNIT) saved times (0.10) to get $80,000 saved?


Thank you for your help!
 
Physics news on Phys.org
UNIT: simple
80 watt times 10,000 hours = 80 times 10,000 x watt times hours = 80,000 watt-hours.

B:
How many kw-hours is 80, 000 watt-hours?
 
80000 watt hours is 80kwh. So multiply 80 kWh to get $8.00?
 
mz19 said:
80000 watt hours is 80kwh. So multiply 80 kWh to get $8.00?
Ofcourse. 80 x 0.1 = 8

Or you can do this:
0.1$ --> 1Kwh
x --> 80

Just cross multiply, :wink: .
 
256bits said:
UNIT: simple
80 watt times 10,000 hours = 80 times 10,000 x watt times hours = 80,000 watt-hours.

B:
How many kw-hours is 80, 000 watt-hours?

80x10000=800,000.
So you save 80 bucks
 
Thread 'Minimum mass of a block'
Here we know that if block B is going to move up or just be at the verge of moving up ##Mg \sin \theta ## will act downwards and maximum static friction will act downwards ## \mu Mg \cos \theta ## Now what im confused by is how will we know " how quickly" block B reaches its maximum static friction value without any numbers, the suggested solution says that when block A is at its maximum extension, then block B will start to move up but with a certain set of values couldn't block A reach...
TL;DR Summary: Find Electric field due to charges between 2 parallel infinite planes using Gauss law at any point Here's the diagram. We have a uniform p (rho) density of charges between 2 infinite planes in the cartesian coordinates system. I used a cube of thickness a that spans from z=-a/2 to z=a/2 as a Gaussian surface, each side of the cube has area A. I know that the field depends only on z since there is translational invariance in x and y directions because the planes are...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Back
Top