How to Calculate the Specific Heat Capacity of the Calorimeter?

  • Thread starter Thread starter kai92
  • Start date Start date
  • Tags Tags
    Heat Temperature
AI Thread Summary
To calculate the specific heat capacity of the calorimeter, the heat gained by the calorimeter must be determined using the equation Q = mcθ. The heat lost by the brass and the heat gained by the oil and calorimeter must balance, leading to the equation Qbrass = Qoil + Qcal. The calculations show that the heat from the oil is 1489.6 J and from the brass is 2940 J. The temperature change for the calorimeter is confirmed to be 14°C, as it shares the same temperature change as the oil. This analysis leads to the conclusion that the specific heat capacity can be calculated once the heat gained by the calorimeter is established.
kai92
Messages
8
Reaction score
0

Homework Statement



A calorimeter contains of 70g oils at temperature of 30oC.If a piece of brass with a mass of 125g heat up until 100oC.After that a brass put in that calorimeter and final temperature of the mixed is 44oC.Calculate the specific heat capacity (c) of the calorimeter if its mass is 100g.(Given c of oil =1.52Jg-1oC-1 & c of brass =0.42Jg-1oC-1)

Homework Equations



Q=mcθ

The Attempt at a Solution



Qoil=70(1.52)(14)=1489.6J
Qbrass=125(0.42)(56)=2940J

Then I stuck.How to find temperature & Q of calorimeter?
 
Physics news on Phys.org
Qoil=70(1.52)(14)=1489.6J
Qbrass=125(0.42)(56)=2940J

Find heat gained by the calorimeter. And then

Qbrass = Qoil + Qcal.
 
Thanks for the help,but just to make sure,is temperature change for calorimeter=44-30=14?
 
kai92 said:
Thanks for the help,but just to make sure,is temperature change for calorimeter=44-30=14?

Yes. Oil is in the calorimeter. So the change in temperature of oil and the calorimeter is the same.
 
Thread 'Voltmeter readings for this circuit with switches'

Thread 'Voltmeter readings for this circuit with switches'

TL;DR Summary: I would like to know the voltmeter readings on the two resistors separately in the picture in the following cases , When one of the keys is closed When both of them are opened (Knowing that the battery has negligible internal resistance) My thoughts for the first case , one of them must be 12 volt while the other is 0 The second case we'll I think both voltmeter readings should be 12 volt since they are both parallel to the battery and they involve the key within what the...
View full post »
Thread 'Struggling to make relation between elastic force and height'

Thread 'Struggling to make relation between elastic force and height'

Hello guys this is what I tried so far. I used the UTS to calculate the force it needs when the rope tears. My idea was to make a relationship/ function that would give me the force depending on height. Yeah i couldnt find a way to solve it. I also thought about how I could use hooks law (how it was given to me in my script) with the thought of instead of having two part of a rope id have one singular rope from the middle to the top where I could find the difference in height. But the...
View full post »

Similar threads

Specific heat capacity of calorimeter
Replies
6
Views
3K
[Heat and calorimeter] I can't get the correct answer
Replies
7
Views
2K
Finding the Initial Temperature of Water in a Calorimeter: A Calorimetry Problem
Replies
2
Views
3K
Specific heat capacity of brass
Replies
9
Views
15K
Determining the specific heat capacity of water
Replies
7
Views
2K
Calculating Heat Capacity of Calorimeter
Replies
12
Views
2K
Why Must a Calorimeter Be Saturated with Water Vapor?
Replies
6
Views
2K
Specific heat capacity, Q = mcθ
Replies
3
Views
3K
Water equivalent of calorimeter
Replies
3
Views
6K
Problem involving specific heat and graph
Replies
3
Views
1K

Hot Threads

Recent Insights

Back
Top