How to Design a High-Frequency Air Core Transformer for Low Power Applications?

AI Thread Summary
To design a high-frequency air core transformer for low power applications using PCB conductors, specific details are crucial, such as the operating frequency, signal power requirements, and circuit impedances. Participants in the discussion emphasize the need for more information to provide effective assistance. Suggestions for resources like application notes or software tools are sought to aid in the design process. Providing comprehensive specifications will enhance the chances of receiving relevant advice. Clear communication of requirements is essential for successful collaboration in transformer design.
Eli Hait
Messages
7
Reaction score
0
Hi,

I need to design a high-frequency, low power air core transformer implemented by conductors printed on PCB.

Does anyone know about an application notes, free software or java applet which cam assist me in this case?

Thanx in advance
despair_eli
:cry:
 
Engineering news on Phys.org
?

??
:cry:
 
In order for anyone to help out . . . you need to provide a lot more information that you did.
What is the frequency involved?
How much signal/power you need to transmitt?
What are the impedances of your circuits?

Oleh
 
Thread 'Weird near-field phenomenon I get in my EM simulation'

Thread 'Weird near-field phenomenon I get in my EM simulation'

I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
View full post »

Thread 'EMF (Electromagnetic Field) & EHS (Electromagnetic Hyper Sensitivity)'

Hello dear reader, a brief introduction: Some 4 years ago someone started developing health related issues, apparently due to exposure to RF & ELF related frequencies and/or fields (Magnetic). This is currently becoming known as EHS. (Electromagnetic hypersensitivity is a claimed sensitivity to electromagnetic fields, to which adverse symptoms are attributed.) She experiences a deep burning sensation throughout her entire body, leaving her in pain and exhausted after a pulse has occurred...
View full post »

Similar threads

Air Core Transformer design help
Replies
1
Views
4K
Current in coupled loops (transformer design)
Replies
14
Views
3K
High-frequency transformers - how are they different?
Replies
5
Views
2K
What's the normal low-load working temperature for an SMPS transformer?
Replies
27
Views
5K
Can Rogowski Coils Be Used Without an Integrator for HOKA Applications?
Replies
4
Views
3K
I Magnetic Field Intensity At the Inductor's Air Gap (+Fringing Flux)
Replies
3
Views
1K
Can RF101 Diodes Be Used in Low-Frequency Recovery Circuits?
Replies
7
Views
1K
High Frequency Transformer Design and Troubleshooting
Replies
8
Views
2K
How to Configure a Power System for High Current and Low Voltage Demands?
Replies
5
Views
2K
Measuring air transformer at resonant frequency
Replies
7
Views
3K

Hot Threads

Recent Insights

Back
Top