I finally found a way to access the BIOS on my computer

  • Thread starter Thread starter The_Absolute
  • Start date Start date
  • Tags Tags
    Computer
AI Thread Summary
Accessing BIOS settings is crucial for overclocking a CPU, but caution is advised, especially for beginners. Overclocking a C2Q Q9400 from 2.66 GHz to 3.00 GHz may be limited by the stock cooler, which might not handle the increased heat effectively. Many OEM computers, including those from Gateway, have locked BIOS settings that prevent overclocking, necessitating a motherboard upgrade for those looking to overclock. When selecting a new motherboard, compatibility with the LGA 775 socket and the specific form factor is essential. Additional cooling solutions, such as case fans, are also recommended to maintain system stability during overclocking. Proper research and understanding of the risks involved in overclocking are critical to avoid potential damage to components.
The_Absolute
Messages
174
Reaction score
0
I have finally found a way to access my BIOS settings in my computer! I am running Windows Vista 64 bit Home Premium, a C2Q Q9400 2.66 GHz @ 2.66 GHz. 6GB of DDR2 800 MHz RAM, Radeon HD 4850 512 MB GPU.

I have never done this before, I am aiming at clocking my CPU from 2.66 GHz to 3.00 GHz. Should I be able to do this with my stock cooler? I heard overclocking can be extremely dangerous. Such as causing your system to constantly crash, not to boot, become unstable, cause data corruption, and even damage/break components on your PC. How do I do this properly, without those things happening?
 
Computer science news on Phys.org
Use your computer in fridge
 
The fact that you are just NOW figuring out how to access your BIOS is enough to tell me that you don't know enough knowledge to even do a small OC on your machine. You can't push that proc to far on the stock cooler anyway. What chip set do you have?
 
You will need to add a fan or fans to your case
Google “computer fans” there are many fans out there.
Many things to consider like do you want them high or low on your case, do you want them to blow inside or suck air out, the noise and of course the size.
Usually they plug right into your existing wiring harness.
 
My motherboard is a Gateway G33M05G1.

I believe the overclocking feature in my BIOS is permanently locked by the manufacturer. As with most Gateway computers.

If I wanted to overclock, I would have to buy another motherboard. Could you recommend any LGA 775 motherboards which are an upgrade from mine, overclockable, and will fit a C2Q Q9400 in it?
 
Correct, nearly all (that I know of) OEM machines have locked BIOS to prevent overclocking in any way.

As far as motherboards, Google. There are forums specifically dedicated to overclocking. Be weary though, many computer manufacturers use weird motherboard sizes such that typical off-the-shelf units don't fit.
 
Don't overclock any computer you don't mind frying.
 
Accessing the BIOS is usually a simply key that is displayed on the screen before windows boots... Usually it is the F2 or F10 key.

J
 

Similar threads

I am hesitant to buy a Radeon HD 5850 because
Replies
5
Views
4K
What is the fastest GPU possible without bottlenecking this CPU?
Replies
9
Views
7K
Would removing the side panel of my PC help with airflow/cooling?
Replies
18
Views
40K
Is there any program I could download to display my CPU temperature?
Replies
4
Views
5K
CPU bottleneck by Radeon HD 5xxx series GPU's?
Replies
1
Views
4K
Will my CPU bottleneck a GeForce GTX 285?
Replies
11
Views
7K
Should I be able to reach 3.0 GHz with my C2Q Q9400?
Replies
2
Views
4K
Comparing two computers I need your opinion
Replies
1
Views
4K
How will Metro 2033 run on my computer?
Replies
2
Views
3K
How much would this set me back?
Replies
3
Views
3K

Hot Threads

Recent Insights

Back
Top