Identifying Freefall: Analyzing Graphs for Acceleration

  • Thread starter Thread starter komender
  • Start date Start date
  • Tags Tags
    Freefall
AI Thread Summary
The discussion revolves around identifying the points of freefall for a ball tossed in the air, using graphs of displacement, velocity, and acceleration. One participant believes freefall occurs between the two maxima points on the acceleration graph, where only gravity acts on the ball. The other argues that freefall starts from the initial slope increase to the final slope decrease, encompassing the entire motion until the ball lands. Clarification indicates that freefall is defined by a constant acceleration of approximately -9.81 m/s², confirming that it occurs when the ball is not influenced by other forces. Ultimately, freefall is recognized as occurring when the acceleration graph shows a constant value of -9.81.
komender
Messages
11
Reaction score
0

Homework Statement


So I am doing my lab, when I realize that I am not sure where the freefall occurs. I collect the data for a ball tossed in the air, and using a vernier motion detector, I found the graphs for displacement, velocity and acceleration (attached). second peak)


Homework Equations





The Attempt at a Solution


I figured that the point where the ball was in freefall was when the acceleration graph was between the two maxima points, as marked on the graph, because this is where the only force that acts on the ball is gravity at those points. My partner on the other hand disagreed, and said that it is in freefall from the beginning of the first slope increase to the last slope decrease (at the beginning of the first peak to the end of the second peak (where it returns to become an unchanged acceleration after the ball has landed).
Which one of us is correct and why?
 

Attachments

  • graph.jpg
    graph.jpg
    39 KB · Views: 503
Physics news on Phys.org
The body is in free fall as soon as it is not attached to or resting on anything.
 
komender said:
I figured that the point where the ball was in freefall was when the acceleration graph was between the two maxima points, as marked on the graph, because this is where the only force that acts on the ball is gravity at those points. My partner on the other hand disagreed, and said that it is in freefall from the beginning of the first slope increase to the last slope decrease (at the beginning of the first peak to the end of the second peak (where it returns to become an unchanged acceleration after the ball has landed).
Which one of us is correct and why?
It's unclear as to what you are saying. What maxima points on which graph? If you mean the area marked off in grey and with brackets, that's not quite correct.
 
I meant the bottom graph, the acceleration vs. time graph. It is the one that is marked off in grey. Does it mean that its in free fall when the acceleration is 9.81, i.e when the curve of the a/t graph is a constant?
 
komender said:
I meant the bottom graph, the acceleration vs. time graph. It is the one that is marked off in grey.
The peaks represent the max acceleration when the ball is being launched and stopped--the result of other forces besides gravity.

Does it mean that its in free fall when the acceleration is 9.81, i.e when the curve of the a/t graph is a constant?
Yes, when the acceleration is -9.81 or so.
 
  • Like
Likes 1 person
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top