I'm having trouble with horizontal line problems and I'd love some help

AI Thread Summary
The discussion focuses on calculating the distance from Earth to the Moon using the time it takes for a laser beam to travel to the Moon and back. The time recorded for the laser pulse is 2.52 seconds, which is crucial for the calculation. The speed of light is identified as the rate (r) needed for the formula D=rt. Since the laser travels to the Moon and back, the total distance must be divided by two to find the one-way distance. The solution emphasizes using the speed of light and the given time to determine the distance accurately.
ColleenaMarie
Messages
2
Reaction score
0

Homework Statement



During an Apollo moon landing, reflecting panels were placed on the moon. *This allowed earth-based astronomers to shoot laser beams at the moon's surface to determine its distance. *The reflected laser beam was observed 2.52 s after the laser pulse was sent. *What was the distance between the astronomers and the moon?


Homework Equations


D=rt


The Attempt at a Solution


How do you find the rate with just time??
 
Physics news on Phys.org
Well you are given time, which is equal to 2.52 seconds. The distance is what you are trying to figure out, and I assume that "r" represents the speed of light? So "r" is a constant which you should be able to look up in your textbook if you do not know it.

Then you just fill in what you know to get D, and remember, the laser is going to the moon and back, so it is traveling twice the distance from just the astronomer to the moon.

Cheers
 
Thank you!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...

Similar threads

Replies
8
Views
5K
Replies
4
Views
3K
Replies
18
Views
7K
Replies
10
Views
4K
Replies
7
Views
7K
Replies
35
Views
10K
Replies
2
Views
8K
Back
Top