Improving FM Radio Reception: Tips & Tricks

  • Thread starter Thread starter spender
  • Start date Start date
  • Tags Tags
    Fm Radio Tips
AI Thread Summary
To improve FM radio reception, users suggest various methods including attaching a longer wire to the existing antenna or using a small metallic object to enhance signal clarity. Adjusting the angle and length of the antenna can also help, as FM transmission antennas are typically elliptically polarized. For significant improvements, investing in a directional antenna like an 8-element YAGI mounted high is recommended, especially in remote areas. Building a 1/2 wavelength dipole antenna for the specific frequency of interest can yield better results than random wire lengths. Overall, experimenting with different antenna configurations and heights is key to achieving clearer FM reception.
spender
Messages
22
Reaction score
0
How to improve FM radio reception? I have this boombox type radio in my room with one meter long telescopic antenna, reception is sometimes really bad. Should I just hook up length of wire to the antenna or what ?
Thanks. :smile:
 
Engineering news on Phys.org
spender said:
How to improve FM radio reception? I have this boombox type radio in my room with one meter long telescopic antenna, reception is sometimes really bad. Should I just hook up length of wire to the antenna or what ?
Thanks. :smile:


well what i do normally...i have just a small antenna but i touch it to some very long metallic container in the open and it becomes clear..i would also love to know what is the processs to catch signals.. :blushing:
 
If I recall FM transmission antennas are elliptically polarized, with a dominant horizontal mode. You might try angling the receiving antenna and adjusting its length.
 
spender said:
How to improve FM radio reception? I have this boombox type radio in my room with one meter long telescopic antenna, reception is sometimes really bad. Should I just hook up length of wire to the antenna or what ?
Thanks. :smile:
What is feasible to do is dependant on circumstance but one solution would be to purchase a good directional antenna and mount it as high as possible. An 8-element YAGI would go a long way towards improving reception in remote/fringe areas. [digression] Imagine a 5-element nearly 60-feet off the ground using guy wired bamboo for the pole…that one worked well.[/digression]
FM is a peculiar beast however and sometimes the only thing that works well is to hold the antenna between finger and thumb, lol.
Ok, you did mention ‘boom box’ and a great many of these are made to be flashy at the expense of a good receiver. If you’re a hand with circuits you can build a booster for the front end and that may very well all you’ll need. One easy way to determine this is to bring in a receiver that is known to have good reception and compare the two. If yours is lacking, I’d break out the soldering iron and spare parts box.
Good luck.
 
thanks guys for the sugestionss, I just attached 4 meters of wire to the antenna and so far no major problems with reception.
 
I enjoyed Boulderhead's suggestion of the 5-8 element Yagi, guyed 60 feet off the ground :biggrin:
That would definitely make an improvement.

Something you could easily try and which ought to work better than a long random length of wire, is to make a 1/2\lambda dipole, cut for the center frequency of the FM band (or if you had a particular station you liked, you could cut the dipole for that frequency). I have used a 1/2 \lambda dipole for FM reception and suspend it horizontally and it works well.

Here is an example of what I am talking about.
http://members.tripod.com/martin_leese/Audio/indoor_aerial.html

Today most FM broadcast tranmissions are circularly polarlized, so if you are slightly more ambitious, you might build yourself a circularly polarized FM antenna.

see this example of what i am referring to:
http://www.n2.net/k6sti/attic.htm

(this antenna was made using 12 feet of #12 electrical wire and fed with 75\Omega coax).
 
Last edited by a moderator:
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Hello dear reader, a brief introduction: Some 4 years ago someone started developing health related issues, apparently due to exposure to RF & ELF related frequencies and/or fields (Magnetic). This is currently becoming known as EHS. (Electromagnetic hypersensitivity is a claimed sensitivity to electromagnetic fields, to which adverse symptoms are attributed.) She experiences a deep burning sensation throughout her entire body, leaving her in pain and exhausted after a pulse has occurred...

Similar threads

Back
Top