How Is Impulse Calculated in Soccer Ball Deflection?

  • Thread starter Thread starter physicsgrouch
  • Start date Start date
  • Tags Tags
    Ball Impulse
AI Thread Summary
Impulse in soccer ball deflection is calculated using the change in momentum formula, where impulse equals mass times the change in velocity. A player heads a 0.421 kg ball, initially traveling at -10.4 m/s, deflecting it at a 50-degree angle. The correct impulse calculation involves using the angle between the tails of the velocity vectors, which should be 130 degrees instead of the initially measured angle. The accurate impulse value, after correcting the angle, is approximately 8.68. Understanding the correct angle and vector components is crucial for accurate impulse calculations in soccer.
physicsgrouch
Messages
9
Reaction score
0
[SOLVED] Impulse of deflected ball

1. Recent studies have raised concern about `heading' in youth soccer (i.e., hitting the ball with the head). A soccer player `heads' a 0.421 kg ball, deflecting it by 50.0 degrees, and keeps its speed of 10.40m/s constant. (The deflection angle is the angle between the ball's initial and final velocity vectors.) What is the magnitude of the impulse which the player must impart to the ball?

m = 0.421 kg
v_{}i = -10.4 m/s
v_{}f = 10.4 m/s at 50 degrees

2. The equations

impulse = \Deltap = m(v_{}i) - m(v_{}f)

so impulse = m(v_{}f - v_{}i)

So I multiplied the mass by the change in velocity. Namely:

3. The solution

0.421 *{sqrt[ (10.40*sin50)^2 + (10.40*(cos50 +1))^2) ]}

So I got about 7.936. But this is wrong. What's up?
 
Physics news on Phys.org
I think you typed it into the calculator wrong. I just plugged it into google and got
Code:
.421 * sqrt(((10.40 * sin(50))^2) + ((10.40 * (cos(50) + 1))^2)) = 8.67976478

or, in \LaTeX

.421 \sqrt{ \left(10.4\sin{50}\right)^2 + \left(10.4\left(\cos{50}+1\right)\right)^2 } = 8.67976478
 
I think that might be in radians...

Thanks, though. My teacher went over the homework, and it seems that I was measuring the wrong angle. The angle is SUPPOSED to be between the tails of the two vectors, but I was measuring the angle between the tip of the initial and the tail of the final. So my calculations should have treated the angle as 130 degrees. Alternatively, I could have made both vectors' x-components have the same signs.

Thanks anyway.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...

Similar threads

Back
Top