Inclined place friction problem

  • Thread starter Thread starter wbetting
  • Start date Start date
  • Tags Tags
    Friction Inclined
AI Thread Summary
The discussion revolves around a physics problem involving two bodies on an incline, focusing on calculating the acceleration of body A under different conditions. Body A weighs 96 N and body B weighs 88 N, with specified coefficients of static and kinetic friction. The angle of the incline is 42°, and the initial conditions include body A being at rest, moving up, and moving down the incline. The importance of drawing free-body diagrams for both masses is emphasized to analyze the forces acting on them. The net force must be calculated to determine acceleration, adhering to Newton's First Law.
wbetting
Messages
24
Reaction score
0

Homework Statement



Body A in Fig. 6-33 weighs 96 N, and body B weighs 88 N. The coefficients of friction between A and the incline are μs = 0.54 and μk = 0.24. Angle θ is 42°. Let the positive direction of an x-axis be down the slope. What is the acceleration of A if A is initially (a) at rest, (b) moving up the incline, and (c) moving down the incline

Homework Equations



fs=usFn
Fk=ukFN
a=v^2/R

The Attempt at a Solution


I am so confused on this problem i dot even know where to start but I know part a is 0!
 
Physics news on Phys.org
Here is the diagram
 

Attachments

  • Screen Shot 2012-06-05 at 6.39.24 PM.png
    Screen Shot 2012-06-05 at 6.39.24 PM.png
    4.2 KB · Views: 488
Let's start with by drawing a free-body diagram for each mass.
Mass A has a force downward to center of Earth equal to its weight, the string that pulls it and third the friction that will appose the motion of the mass.
Mass B has 2 forces acting on it. Its weight and the string that pull up.

Remember if there is the net forces(ƩF≠0) on each mass then there's acceleration as in Newton's First Law.
Fnet=ma
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'Calculation of Tensile Forces in Piston-Type Water-Lifting Devices at Elevated Locations'
Figure 1 Overall Structure Diagram Figure 2: Top view of the piston when it is cylindrical A circular opening is created at a height of 5 meters above the water surface. Inside this opening is a sleeve-type piston with a cross-sectional area of 1 square meter. The piston is pulled to the right at a constant speed. The pulling force is(Figure 2): F = ρshg = 1000 × 1 × 5 × 10 = 50,000 N. Figure 3: Modifying the structure to incorporate a fixed internal piston When I modify the piston...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top