Is Filling 4 Tube Steel with Concrete a Stronger Option for Sail Shade Supports?

  • Thread starter Thread starter superjetflyer
  • Start date Start date
  • Tags Tags
    Steel Strength
AI Thread Summary
Filling 4" tube steel with concrete is considered a viable option for enhancing strength and resistance to buckling in sail shade supports. The discussion emphasizes that this method can provide more stability compared to using 6" tube steel alone. Concerns about cost are noted, but the focus remains on achieving a strong installation. Proper fixtures at the base are essential for ensuring the effectiveness of the concrete-filled tubes. Overall, this approach is recommended for the specific conditions in Phoenix, where extreme weather is not a concern.
superjetflyer
Messages
1
Reaction score
0
I am currently installing some sail shades in my back yard. The manufacturer is callin for 6" tube steel supports but I believe that 4" tube steel filled and compacted with concrete will provide more strength and resistance to buckling. Obviously I am concerned about price but want to do a great job. I am in Phoenix and do not need to worry about hurricanes or snow load. The pipes are both schedule 40 with 1/4" walls. Any thoughts?

Tim
 
Physics news on Phys.org
If you fill 4" tubes with concrete it will not buckle. Go with that, as long as you can install proper fixtures at the bottom.
 
I think it's easist first to watch a short vidio clip I find these videos very relaxing to watch .. I got to thinking is this being done in the most efficient way? The sand has to be suspended in the water to move it to the outlet ... The faster the water , the more turbulance and the sand stays suspended, so it seems to me the rule of thumb is the hose be aimed towards the outlet at all times .. Many times the workers hit the sand directly which will greatly reduce the water...

Similar threads

Replies
17
Views
12K
Replies
1
Views
8K
Back
Top