Is it possible to physically separate colloids from sol'n?

AI Thread Summary
Colloids smaller than 0.7 micrometers are not effectively filtered using conventional filters, prompting the exploration of alternative physical separation methods. Centrifugation is suggested as a viable option for separating colloids from solutions. Coagulation and flocculation techniques can aggregate colloidal particles, facilitating their removal, potentially without contamination by using in-situ ion generation through electrolysis. Ultrasound is also mentioned as a method worth considering. The emphasis remains on minimizing contamination by avoiding chemical additives, focusing on physical methods for separation.
Baho Ilok
Messages
45
Reaction score
5
I understand that colloids (at least those less than 0.7 um in diameter) are not filterable using conventional filters. But are there other physical separation methods that can separate them from solution, apart from using membranes? Centrifugation perhaps? I just want some confirmation. Thank you!
 
Chemistry news on Phys.org
Coagulation and flocculation can be used to cause colloidal particles to aggregate, which enables their easier removal from a solution (e.g. by filtration).
 
IIRC, you may be able to coagulate / flocculate some colloids 'without' contamination by generating ions in-situ using electrolysis.

Another approach is ultrasound.
YMMV...
 
Ygggdrasil said:
Coagulation and flocculation can be used to cause colloidal particles to aggregate, which enables their easier removal from a solution (e.g. by filtration).
I want to minimize contamination as much as possible so I want to avoid adding chemicals, that's why I emphasized physical methods. Anyway, thank you for the suggestion!
 
Nik_2213 said:
IIRC, you may be able to coagulate / flocculate some colloids 'without' contamination by generating ions in-situ using electrolysis.

Another approach is ultrasound.
YMMV...
Interesting, this is the first time that I've heard of these methods. I will explore these ideas more. Thank you!
 
I want to test a humidity sensor with one or more saturated salt solutions. The table salt that I have on hand contains one of two anticaking agents, calcium silicate or sodium aluminosilicate. Will the presence of either of these additives (or iodine for that matter) significantly affect the equilibrium humidity? I searched and all the how-to-do-it guides did not address this question. One research paper I found reported that at 1.5% w/w calcium silicate increased the deliquescent point by...
Back
Top