Is it possible to step up DC voltage to 300V from only 4V?

  • Thread starter Thread starter junguo93
  • Start date Start date
  • Tags Tags
    Dc Voltage
AI Thread Summary
It is possible to step up DC voltage from 4V to 300V using DC-DC converters, typically involving the use of inductors and oscillators. This process often requires converting the DC to AC first, using inverters, before stepping up the voltage and converting back to DC. The key challenge is varying the current, especially when the source is a photovoltaic cell, which may not provide sufficient current for such a significant voltage increase. Achieving this requires careful circuit design to manage power levels, as stepping up voltage also necessitates a proportional increase in current. Overall, while stepping up DC voltage is feasible, it demands specific circuit configurations to handle the associated power dynamics effectively.
junguo93
Messages
8
Reaction score
0
I only learned of AC-AC stepping up, i am just wondering if there is a possibility for a DC-DC Stepping up, for about a 4V to a 300V. If it is possible please help me out with this..

I was wondering if it is about converting DC-AC stepping up AC-DC, though the use of inverters. I am also wondering if it is the only way.
 
Engineering news on Phys.org
One way or another, if you want to produce a higher DC voltage than the DC one you've got already, you have to vary current in some way so that you can then induce a higher voltage, using an inductor of some kind.
This can be achieved without explicitly using a transformer (an appropriate circuit with just an inductor can work) and it is often achieved using much higher frequencies than the Mains. There are hundreds of alternative circuit designs but they all have the common basic features of an oscillator and an inductor.
 
Thanks for the Reply, but how do we vary the current, since i am actually producing the 4V with a Photovoltaic Cell, which i do not think is capable of a good range of currents?
 
Obviously, if you step up the voltage by nearly 100 times, you will end up needing 100 times the current from your low voltage cell. VA is the name of the game.
 
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Hello dear reader, a brief introduction: Some 4 years ago someone started developing health related issues, apparently due to exposure to RF & ELF related frequencies and/or fields (Magnetic). This is currently becoming known as EHS. (Electromagnetic hypersensitivity is a claimed sensitivity to electromagnetic fields, to which adverse symptoms are attributed.) She experiences a deep burning sensation throughout her entire body, leaving her in pain and exhausted after a pulse has occurred...
Back
Top