Is This PV Diagram Calculation Correct?

AI Thread Summary
The discussion revolves around a homework problem involving a P-V diagram for a monatomic ideal gas undergoing three distinct processes. The user calculated the change in internal energy (U) for the first leg of the process as +15008.79 joules and the work (W) done as 10000 joules, which received validation from other forum members. They confirmed that the calculations for U and W are correct and suggested using the first law of thermodynamics to find the heat exchange (Q) for that leg. The term "isometric" was clarified as likely referring to "isochoric," which means constant volume. The user was encouraged to apply the same methods to the remaining legs of the process to complete the problem.
zaf
Hello forum members

I have a HW problem on ploting a P-V digram, I worked out a solution..can someone have a look at it and let me know if I am correct

the Question is as follows

2 moles of a monatomic ideal gas initially occupies a volum of 100 liters at a pressure of 100 KPa. The gas then expands iobarically to 200 liters (leg 1->2), followed by an isometric pressure increase to 300 KPa (leg 2-3), and ending in an isobaric expansion to 300 liters (leg 3->4).

Find change in U (internal energy) for each leg
Find W (work) for each leg
Find Q (heat exchange) for each leg


here is part of the solution

T1 = (100000 * .10) / (8.314 * 2) = 601 K
U1 = (3/2)*2*8.31*601 = 14982 J

T2 = (100000 * .20) / (8.31 * 2) = 1203 K
U2 = (3/2)*2*8.31*1203 = 29990 joules

Therefore
U for leg 1->2 is +15008.79 joules

W for leg 1-2 would be 10000 joules, which is P times change in volume

Am i correct so far...if that is so...then i can solve the rest


Zaf
 
Physics news on Phys.org
hmmm

Its a while since i did this, but i think that's correct. I got dU by using dU = nCdT = 2 * 12.47 * 602 = 15014 J which is close enough.

Your method for working out the work is correct i think, i also got 10,000 J

What is isometric? i know of isobaric (const pressure), isochoric (const volume), isothermic (const temp), but isometric I've not heard of..

I presume isometric means isochoric?
 
ar

Hello Zafar,

Your solution looks correct so far. The change in internal energy for leg 1-2 is +15008.79 joules. The work done by the gas for this leg would be 10000 joules, as you have calculated. To find the heat exchange for this leg, you would need to use the first law of thermodynamics, which states that the change in internal energy (ΔU) equals the heat exchange (Q) minus the work done (W). So for leg 1-2, the heat exchange would be 25008.79 joules (15008.79 + 10000). You can continue this approach for the remaining legs and solve the problem. Good job on your solution so far!
 
I multiplied the values first without the error limit. Got 19.38. rounded it off to 2 significant figures since the given data has 2 significant figures. So = 19. For error I used the above formula. It comes out about 1.48. Now my question is. Should I write the answer as 19±1.5 (rounding 1.48 to 2 significant figures) OR should I write it as 19±1. So in short, should the error have same number of significant figures as the mean value or should it have the same number of decimal places as...
Thread 'A cylinder connected to a hanging mass'
Let's declare that for the cylinder, mass = M = 10 kg Radius = R = 4 m For the wall and the floor, Friction coeff = ##\mu## = 0.5 For the hanging mass, mass = m = 11 kg First, we divide the force according to their respective plane (x and y thing, correct me if I'm wrong) and according to which, cylinder or the hanging mass, they're working on. Force on the hanging mass $$mg - T = ma$$ Force(Cylinder) on y $$N_f + f_w - Mg = 0$$ Force(Cylinder) on x $$T + f_f - N_w = Ma$$ There's also...
Back
Top