How Long Should a Ramp Be to Stop a Ford Ranger with Brake Failure?

AI Thread Summary
To stop a Ford Ranger with a mass of 2430 kg traveling at 85 mph down a mountain road using a runaway truck ramp with a 15-degree incline, the kinetic energy (KE) was calculated to be 1.75 x 10^6 J. By equating this to potential energy (PE = mgh), a height of 73.559 meters was determined. Using trigonometric functions, the minimum ramp length was calculated to be 284 meters. It's noted that the mass of the vehicle is irrelevant to the calculations. The solution is confirmed as correct.
Tiffaney Sporl
Messages
3
Reaction score
0
A Ford Ranger with a mass of 2430 kg is traveling at a velocity of 85 mph down a mountain road. The brakes fail and the driver elects to use a "run away" truck ramp to stop the vehicle. The ramp has an incline of 15.0 degrees. What is the minimum length the ramp must be in order for this strategy to stop the truck? Neglect friction and air resistance.

I found the KE at 1.75 x 10^6 J then set it equal to PE (mgh). This gave me a height of 73.559m. I used SOH to get a length of 284m. Is this correct?
 
Last edited:
Physics news on Phys.org
Forum rules require you to show your own attempt to solve the problem before help given.
 
CWatters said:
Forum rules require you to show your own attempt to solve the problem before help given.

Sorry I just added my attempt
 
Tiffaney Sporl said:
I found the KE at 1.75 x 10^6 J then set it equal to PE (mgh). This gave me a height of 73.559m. I used SOH to get a length of 284m. Is this correct?
Yes. You can make the working a bit simpler by noticing that the mass is irrelevant.
 
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Thread 'Variable mass system : water sprayed into a moving container'
Starting with the mass considerations #m(t)# is mass of water #M_{c}# mass of container and #M(t)# mass of total system $$M(t) = M_{C} + m(t)$$ $$\Rightarrow \frac{dM(t)}{dt} = \frac{dm(t)}{dt}$$ $$P_i = Mv + u \, dm$$ $$P_f = (M + dm)(v + dv)$$ $$\Delta P = M \, dv + (v - u) \, dm$$ $$F = \frac{dP}{dt} = M \frac{dv}{dt} + (v - u) \frac{dm}{dt}$$ $$F = u \frac{dm}{dt} = \rho A u^2$$ from conservation of momentum , the cannon recoils with the same force which it applies. $$\quad \frac{dm}{dt}...

Similar threads

Back
Top