Looking for a recommendation for a good book

AI Thread Summary
Guy Yafe is seeking recommendations for a beginner's book on building electric circuits, specifically for projects involving microcontrollers and ultrasonic components. He has a background in Physics and Computer Science but lacks practical knowledge in electronics. A recommended book is "The Art of Electronics" by Horowitz and Hill, noted for its foundational approach to understanding circuit components and their integration. Guy expresses appreciation for the suggestion, confirming it aligns with his needs for introductory material. This discussion highlights the importance of accessible resources for self-study in electronics.
guyafe
Messages
2
Reaction score
0
Hi all,
I am trying to build a simple electric circuit that includes some microcintrollers and ultrasonic receivers and transmitters.
The thing is that I have no idea about how to build electric circuits. I do have a BSC in Physics and Computer Science, so I believe I could study it by myself.
I tried looking at the university's syllabi but couldn't find anything usefule.
Can anyone recommend me about a good book to start from?
I need something that is the basis: How to combine all the components, understanding how everything works.

Thanks,
Guy Yafe
 
Engineering news on Phys.org
guyafe said:
Hi all,
I am trying to build a simple electric circuit that includes some microcintrollers and ultrasonic receivers and transmitters.
The thing is that I have no idea about how to build electric circuits. I do have a BSC in Physics and Computer Science, so I believe I could study it by myself.
I tried looking at the university's syllabi but couldn't find anything usefule.
Can anyone recommend me about a good book to start from?
I need something that is the basis: How to combine all the components, understanding how everything works.

Thanks,
Guy Yafe

Welcome to the PF. If you are looking for an intro electonics book, the Art of Electronics by Horowitz and Hill is a good read, IMO:

https://www.amazon.com/dp/0521370957/?tag=pfamazon01-20

You can take a look at it at your local university library to see if it looks good to you.
 
Last edited by a moderator:
Great!

This is exactly what I was looking for.
Basically EE 1-O-1.
Thanks a lot for your help.

Guy
 
Very basic question. Consider a 3-terminal device with terminals say A,B,C. Kirchhoff Current Law (KCL) and Kirchhoff Voltage Law (KVL) establish two relationships between the 3 currents entering the terminals and the 3 terminal's voltage pairs respectively. So we have 2 equations in 6 unknowns. To proceed further we need two more (independent) equations in order to solve the circuit the 3-terminal device is connected to (basically one treats such a device as an unbalanced two-port...
suppose you have two capacitors with a 0.1 Farad value and 12 VDC rating. label these as A and B. label the terminals of each as 1 and 2. you also have a voltmeter with a 40 volt linear range for DC. you also have a 9 volt DC power supply fed by mains. you charge each capacitor to 9 volts with terminal 1 being - (negative) and terminal 2 being + (positive). you connect the voltmeter to terminal A2 and to terminal B1. does it read any voltage? can - of one capacitor discharge + of the...
Thread 'Weird near-field phenomenon I get in my EM simulation'
I recently made a basic simulation of wire antennas and I am not sure if the near field in my simulation is modeled correctly. One of the things that worry me is the fact that sometimes I see in my simulation "movements" in the near field that seems to be faster than the speed of wave propagation I defined (the speed of light in the simulation). Specifically I see "nodes" of low amplitude in the E field that are quickly "emitted" from the antenna and then slow down as they approach the far...
Back
Top