Magnetic Field & 2 wires with same current

AI Thread Summary
Two parallel wires, 10.0 cm apart, carry equal currents of 3.78A in the same direction, creating a magnetic field at a point 15.4 cm above one wire. The magnetic field strength can be calculated using the formula B = (μ0I)/(2πr), where μ0 is 4π × 10^-7. The distance from the wire to the point of interest is crucial for accurate calculations, with the correct distance LP determined as approximately 0.1836 m. The resulting magnetic field strength at point P is found to be 4.12 μT, not 4.12 T, emphasizing the importance of unit accuracy. To find the total magnetic field, the contributions from both wires must be vectorially added.
sami23
Messages
69
Reaction score
1

Homework Statement


Two long, straight, parallel wires, 10.0 cm apart carry equal 3.78A currents in the same direction. Find the magnitude and direction of the magnetic field at point 15.4 cm above one wire.


Homework Equations


B= (\mu0I)/(2\pir)
\mu0 = 4\pi * 10-7
Use the right hand rule to find the direction of magnetic field

The Attempt at a Solution


(4\pi*10-7)*3.78 / (2\pi0.154) * cos(\theta)*2
I'm not sure on how to go about solving this problem
 

Attachments

  • c10.jpg
    c10.jpg
    1.2 KB · Views: 491
Physics news on Phys.org
That's the correct formula for finding the flux density B at a point a distance r from a long straight wire carrying a current I
A diagram helps a lot here.
The two wires are L and R and we are looking along them, the current flowing into the page/screen.
The point we are interested in is at P.
The distances are shown.
Can you calculate the distance LP which you need to find the field due to L?
Mag-BField2.png

The magnitude and direction of the field at P is found by adding the two vectors for the forces due to L and R. These are shown as BL and BR.
Do you know how to add vectors?


Remember, the magnetic field around a wire is a circle with the wire at the centre.
If the current is into the page the field is clockwise around the wire.
 
LP = \sqrt{0.154^2+0.1^2} = 0.1836 m

B = (4\pi*10-7)(3.78) / (2\pi*0.1836) = 4.12 T
 
You have calculated BL
The answer should be 4.12μT not 4.12T
You also need to calculate BR
(It's the same formula but with r=0.154m)

When you have both BL and BR you need to add the vectors. Do you know how to do that?
 
Yes, Thanks so much.
 
Kindly see the attached pdf. My attempt to solve it, is in it. I'm wondering if my solution is right. My idea is this: At any point of time, the ball may be assumed to be at an incline which is at an angle of θ(kindly see both the pics in the pdf file). The value of θ will continuously change and so will the value of friction. I'm not able to figure out, why my solution is wrong, if it is wrong .
TL;DR Summary: I came across this question from a Sri Lankan A-level textbook. Question - An ice cube with a length of 10 cm is immersed in water at 0 °C. An observer observes the ice cube from the water, and it seems to be 7.75 cm long. If the refractive index of water is 4/3, find the height of the ice cube immersed in the water. I could not understand how the apparent height of the ice cube in the water depends on the height of the ice cube immersed in the water. Does anyone have an...
Back
Top